User guide

3-12
IMBM-H61A
Serial Port 3~9 [Enabled]
Allowsyoutoenableordisableserialports(COM)3~9.Congurationoptions:
[Enabled] [Disabled]
RS Mode [RS232]
Allowsyoutoconguretheserialcommunicationsstandardofserialport(COM)9.
Congurationoptions:[RS232][RS422][RS485]
Serial Port 10~13 [Enabled]
Allowsyoutoenableordisableserialports(COM)10~13.Congurationoptions:
[Enabled] [Disabled]
Parallel Port [Enabled]
Allowsyoutoenableordisabletheparallelport(LPT).Congurationoptions:[Enabled]
[Disabled]
Change Settings [Auto]
AllowsyoutoselecttheParallelPortbaseaddress.Congurationoptions:[Auto][IO=378h;
IRQ=5][IO=378h;IRQ=5,6,7,9,10,11,12][IO=278h;IRQ=5,6,7,9,10,11,12][IO=3BCh;
IRQ=5,6,7,9,10,11,12]
Device Mode [STD Printer Mode]
AllowsyoutosetthePrinterportmode.Congurationoptions:[STDPrinterMode][SPP
Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode]
3.4.9 APM
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system
state was before the AC power loss.
Power On By PCIE/PCI [Disabled]
[Disabled] Disables the PCIE/PCI devices to generate a wake event.
[Enabled] Enables the PCIE/PCI devices to generate a wake event.
Power On By Ring [Disabled]
[Disabled] Disables Ring to generate a wake event.
[Enabled] Enables Ring to generate a wake event.
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Secondwillbecomeuser-congurablewithset
values.