User Manual

Industrial Motherboard IMBI-Q45
Chapter4 Drivers Installation 4-5
Note: For Windows Vista you can use Floppy, CD/DVD or USB.
-----------------------------------------------------------------------------------------
Important
Please follow the instruction below to make an “Intel
®
RAID Driver”
for yourself.
1. Insert the AAEON CD into the CD-ROM drive
2. Click the “Browse CD” on the Setup screen
3. Copy all the contents in \\Step5 - RAID\F6 Install
Floppy\32bit or 64bit to a formatted floppy diskette
4. The driver diskette for Intel
®
ICH10DO RAID Controller is
done
-----------------------------------------------------------------------------------------
For Windows Vista:
4. During the Operating system installation, after selecting the
location to install Vista click on “Load Driver” b utton to install a
third party SCSI or RAID driver.
5. When prompted, insert the floppy disk or media (Floppy,
CD/DVD or USB) you created in step 3 a nd press Enter.
6. You should be shown a list of available SCSI Adapters. This
list should include “Intel(R) ICH8R/ICH9 R/ICH10R/DO SATA
RAID Controller” whe n the system is in RAID mode and
“Intel(R) ICH10D/DO SATA AHCI Controller” when the system
is in AHCI mode.
7. Select the appropriate Intel RAID co ntroller and press
ENTER.