SubCompact Board GENE-QM87 GENE-QM87 Intel® 4th Generation CoreTM i Sereis Processor 2 Gigabit Ethernet 2 USB3.0, 6 USB 2.0, 4 COM 8-bit Digital I/O 2 SATA 6.0Gb/s (Optional RAID) 1 CFast™, 1 Mini Card, LPC nd GENE-QM87 Manual 2 Ed.
SubCompact Board GENE-QM87 Copyright Notice This document is copyrighted, 2014. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
SubCompact Board GENE-QM87 Acknowledgments All other products’ name or trademarks are properties of their respective owners. AMI is a trademark of American Megatrends Inc. CFast™ is a trademark of the Compact Flash Association. Intel® and Core™ are trademarks of Intel® Corporation. Microsoft Windows® is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc.
SubCompact Board GENE-QM87 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 DVD-ROM for Manual (in PDF Format) and Drivers 1 GENE-QM87 1 Power Cable 170204010R If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
SubCompact Board GENE-QM87 Contents Chapter 1 General Information 1.1 Introduction ................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Quick Installation Guide 2.1 2.1 Safety Precautions .............................................. 2-2 2.2 Location of Connectors and Jumpers ....................... 2-3 2.
SubCompact Board GENE-QM87 2.15 AT/ATX Power Supply Mode Selection (JP9) ....... 2-13 2.16 Clear CMOS Jumper (JP10) ................................. 2-14 2.17 COM2 Pin8 Function Selection (JP11) ................. 2-14 2.18 +5VSB Output w/SMBus (CN1) ............................ 2-14 2.19 LVDS Port 2 Inverter / Backlight Connector (CN2) 2-15 2.20 +5V Output for SATA HDD (CN3) ......................... 2-16 2.21 External +5VSB Input (CN4) ................................. 2-16 2.22 CPU FAN (CN5) ..........
SubCompact Board GENE-QM87 2.39 COM Port 3 (CN22) ............................................... 2-31 2.40 LPC Expansion Connector (CN23) ....................... 2-32 2.41 COM Port 2 (RS232/485/422) (CN24) .................. 2-33 2.42 PS/2 Keyboard/Mouse Combo Port (CN25) ......... 2-35 2.43 Stereo Audio RIGHT Channel (CN26) .................. 2-36 2.44 Stereo Audio LEFT Channel (CN27) ..................... 2-36 2.45 Front Panel (CN28) ............................................... 2-37 2.
SubCompact Board GENE-QM87 Appendix A Programming The Watchdog Timer A.1 Programming .........................................................A-2 A.2 F81866 Watchdog Timer Initial Program ...............A-5 Appendix B I/O Information B.1 I/O Address Map ....................................................B-2 B.2 Memory Address Map ............................................B-4 B.3 IRQ Mapping Chart ................................................B-5 B.4 DMA Channel Assignments.……………………… .
SubCompact Board GENE-QM87 Chapter 1 General Information Chapter 1 General Information 1- 1
SubCompact Board GENE-QM87 1.1 Introduction ® th The GENE-QM87 supports Intel 4 Generation Core™ i Series ® processors which when paired with the Intel QM87 chipset offers a high performance computing platform with low power consumption. This new product supports 204-pin DDR3L SODIMM at speeds of 1333/1600 MHz, up to 8 GB. ™ One CFast and two SATA 6.0Gb/s (Optional RAID) interfaces provide ample storages. With dual Gigabit Ethernet, four COM ports, two USB3.0 and six USB2.
SubCompact Board GENE-QM87 1.2 Features ® th Intel 4 Generation Core™ i5-4402E Processor Intel QM87 204-pin DDR3L 1333/1600 MHz SODIMM x 1, Up to 8 GB Gigabit Ethernet x 2 CRT, DVI, 18/24-bit Dual-Channel LVDS LCD x 2, HDMI x 1 2 CH Audio + 2W AMP SATA 6.0Gb/s x 2 (Optional RAID), CFast™ x 1 USB3.0 x 2, USB2.
SubCompact Board GENE-QM87 1.3 Specifications System From Factor 3.5” ® th Processor Intel 4 Generation Core™ i5-4402E Processors System Memory 204-pin DDR3L 1333/1600 MHz SODIMM x 1, Max.
SubCompact Board Operating Humidity GENE-QM87 0% ~ 90% relative humidity, non-condensing Display: Supports CRT/LCD, HDMI/LCD simultaneous / tripple view displays ® Chipset Intel QM87 integrated Memory Shared system memory up to 512MB Resolution Up to 2048x1536 for CRT Up to 1920 x 1200 for LCD, HDMI, DVI HDMI HDMI x 1 DVI DVI x 1 Storage SATA 6.0Gb/s x 2 , CFast™ x 1 Serial Port RS-232 x 3; I/O: RS-232/422/485 (auto flow) x 1 USB USB3.0 x 2, USB2.
SubCompact Board GENE-QM87 Chapter 2 Quick Installation Guide Chapter 2 Quick Installation Guide 2-1
SubCompact Board GENE-QM87 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times.
SubCompact Board GENE-QM87 2.
SubCompact Board Solder Side Chapter 2 Quick Installation Guide 2-4 GENE-QM87
SubCompact Board GENE-QM87 2.
SubCompact Board Solder Side Chapter 2 Quick Installation Guide 2-6 GENE-QM87
SubCompact Board GENE-QM87 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
SubCompact Board GENE-QM87 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
SubCompact Board GENE-QM87 CN20 Touch Screen Connector CN21 COM Port 4 CN22 COM Port 3 CN23 LPC Expansion Connector CN24 COM Port 2 (RS232/485/422) CN25 PS/2 Keyboard/Mouse Combo Port CN26 Stereo Audio RIGHT Channel CN27 Stereo Audio LEFT Channel CN28 Front Panel CN29 10M/100M/1G Ethernet Port 1 CN30 10M/100M/1G Ethernet Port 2 CN31 USB 2.0/3.
SubCompact Board GENE-QM87 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper you connect the pins with the clip. To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3.
SubCompact Board GENE-QM87 2.7 Mini-Card with mSATA / PCIe Selection (JP1) 1 2 3 1 2 3 mSATA PCIe (Default) JP1 Function 1-2 mSATA 2-3 PCIe (Default) 2.8 Touch Screen 4/5/8-Wire Selection (JP2) 1 2 3 1 2 3 4/8-wire mode (Default) 5-wire mode JP2 Function 1-2 4/8-wire mode (Default) 2-3 5-wire mode 2.
SubCompact Board GENE-QM87 2.10 LVDS Port 1 Backlight Lightness Control Mode Selection (JP4) 1 2 3 VR Mode 1 2 3 PWM Mode (Default) JP4 Function 1-2 VR Mode 2-3 PWM Mode (Default) 2.11 LVDS Port 1 Operating Voltage Selection (JP5) 1 2 3 +5V 1 2 3 +3.3V (Default) JP5 Function 1-2 +5V 2-3 +3.3V (Default) 2.12 LVDS Port 2 Operating Voltage Selection (JP6) 1 2 3 +5V 1 2 3 +3.3V (Default) JP6 Function 1-2 +5V 2-3 +3.
SubCompact Board GENE-QM87 2.13 LVDS Port 2 Backlight Inverter Voltage Selection (JP7) 1 2 3 +12V 1 2 3 +5V (Default) JP7 Function 1-2 +12V 2-3 +5V (Default) 2.14 LVDS Port 2 Backlight Lightness Control Mode Selection (JP8) 1 2 3 VR Mode 1 2 3 PWM Mode (Default) JP8 Function 1-2 VR Mode 2-3 PWM Mode (Default) 2.
SubCompact Board GENE-QM87 2.16 Clear CMOS Jumper (JP10) 1 2 3 1 2 3 Normal (Default) Clear CMOS JP10 Function 1-2 Normal (Default) 2-3 Clear CMOS 2.17 COM2 Pin8 Function Selection (JP11) 1 3 5 2 4 6 +12V JP11 1 3 5 2 4 6 Ring (Default) 1 3 5 2 4 6 +5V Function 1-2 +12V 3-4 Ring (Default) 5-6 +5V 2.
SubCompact Board GENE-QM87 Pin Pin Name Signal Type Signal Level 1 SMB_DATA I/O +3.3V 2 GND GND 3 SMB_CLK I/O 4 GND GND 5 PS_ON# OUT +3.3V 6 +5VSB PWR +5V +3.3V 2.19 LVDS Port 2 Inverter / Backlight Connector (CN2) 1 BLK_PWR 2 BKL_CONTROL 3 GND 4 GND 5 BKL_ENABLE Pin Pin Name Signal Type Signal Level 1 BKL_PWR PWR +5V / +12V 2 BKL_CONTROL OUT 3 GND GND 4 GND GND 5 BKL_ENABLE OUT +5V Note: LVDS2/BKL_PWR can be set to +5V or +12V by JP7.
SubCompact Board GENE-QM87 2.20 +5V Output for SATA HDD (CN3) +5V GND Pin Pin Name Signal Type Signal Level 1 +5V PWR +5V 2 GND GND 2.21 External +5VSB Input (CN4) 1 PS_ON# 2 GND 3 +5VSB Pin Pin Name Signal Type Signal Level 1 PS_ON# OUT +3.3V 2 GND GND 3 +5VSB PWR 2.
SubCompact Board GENE-QM87 Pin Pin Name Signal Type 1 GND GND 2 FAN_POWER PWR 3 FAN_TAC IN 4 FAN_CTL IN Signal Level +12V 2.23 SATA Port 2 (CN6) Pin 1 Pin 7 Pin Pin Name Signal Type 1 GND GND 2 SATA_TX1+ DIFF 3 SATA_TX1- DIFF 4 GND GND 5 SATA_RX1- DIFF 6 SATA_RX1+ DIFF 7 GND GND Signal Level 2.
SubCompact Board GENE-QM87 Pin Pin Name Signal Type 1 GND GND 2 SATA_TX0+ DIFF 3 SATA_TX0- DIFF 4 GND GND 5 SATA_RX0- DIFF 6 SATA_RX0+ DIFF 7 GND GND Signal Level 2.25 Main Power Input (+12V ONLY) (CN8) +12V GND Pin Pin Name Signal Type Signal Level 1 BKL_PWR PWR +5V / +12V 2 BKL_CONTROL OUT 2.
SubCompact Board GENE-QM87 1 DIO0 I/O +5V 2 DIO1 I/O +5V 3 DIO2 I/O +5V 4 DIO3 I/O +5V 5 DIO4 I/O +5V 6 DIO5 I/O +5V 7 DIO6 I/O +5V 8 DIO7 I/O +5V 9 +5V PWR +5V 10 GND GND 2.
SubCompact Board 5 BKL_ENABLE GENE-QM87 OUT +5V Note: LVDS2/BKL_PWR can be set to +5V or +12V by JP3. LVDS2/BKL_CONTROL can be set by JP4. The driving current supports up to 2A. 2.28 SPI Programming Header (Debug ONLY) (CN11) Pin Pin Name Signal Type Signal Level 1 +3.3V PWR +3.3V 2 GND GND 3 CS# I/O 4 CLK I/O 5 SO I/O 6 SI I/O 7 NC 8 NC 2.29 USB 2.
SubCompact Board GENE-QM87 Pin Pin Name Signal Type Signal Level 1 +5VSB PWR +5V 2 USB2_D- DIFF 3 USB2_D+ DIFF 4 GND GND 5 GND GND 2.30 USB 2.
SubCompact Board GENE-QM87 2.31 LVDS Port 1 Connector (CN14) PIN 29 PIN 30 PIN 1 PIN 2 Pin Pin Name Signal Type 1 BKL_ENABLE OUT 2 BKL_CONTROL OUT 3 LCD_PWR PWR 4 GND GND 5 LVDS_A_CLK- DIFF 6 LVDS_A_CLK+ DIFF 7 LCD_PWR PWR 8 GND GND 9 LVDS_DA0- DIFF 10 LVDS_DA0+ DIFF 11 LVDS_DA1- DIFF Chapter 2 Quick Installation Guide 2-22 Signal Level +3.3V/+5V +3.
SubCompact Board GENE-QM87 12 LVDS_DA1+ DIFF 13 LVDS_DA2- DIFF 14 LVDS_DA2+ DIFF 15 LVDS_DA3- DIFF 16 LVDS_DA3+ DIFF 17 DDC_DATA I/O +3.3V 18 DDC_CLK I/O +3.3V 19 LVDS_DB0- DIFF 20 LVDS_DB0+ DIFF 21 LVDS_DB1- DIFF 22 LVDS_DB1+ DIFF 23 LVDS_DB2- DIFF 24 LVDS_DB2+ DIFF 25 LVDS_DB3- DIFF 26 LVDS_DB3+ DIFF 27 LCD_PWR PWR 28 GND GND 29 LVDS_B_CLK- DIFF 30 LVDS_B_CLK+ DIFF +3.3V/+5V Note: LVDS1 LCD_PWR can be set to +3.3V or +5V by JP5. The max.
SubCompact Board GENE-QM87 2.32 LVDS Port 2 Connector (CN15) PIN 29 PIN 30 PIN 1 PIN 2 Pin Pin Name Signal Type 1 BKL_ENABLE OUT 2 BKL_CONTROL OUT 3 LCD_PWR PWR 4 GND GND 5 LVDS_C_CLK- DIFF 6 LVDS_C_CLK+ DIFF 7 LCD_PWR PWR 8 GND GND 9 LVDS_DC0- DIFF 10 LVDS_DC0+ DIFF 11 LVDS_DC1- DIFF Chapter 2 Quick Installation Guide 2-24 Signal Level +3.3V/+5V +3.
SubCompact Board GENE-QM87 12 LVDS_DC1+ DIFF 13 LVDS_DC2- DIFF 14 LVDS_DC2+ DIFF 15 LVDS_DC3- DIFF 16 LVDS_DC3+ DIFF 17 DDC_DATA I/O +3.3V 18 DDC_CLK I/O +3.3V 19 LVDS_DD0- DIFF 20 LVDS_DD0+ DIFF 21 LVDS_DD1- DIFF 22 LVDS_DD1+ DIFF 23 LVDS_DD2- DIFF 24 LVDS_DD2+ DIFF 25 LVDS_DD3- DIFF 26 LVDS_DD3+ DIFF 27 LCD_PWR PWR 28 GND GND 29 LVDS_D_CLK- DIFF 30 LVDS_D_CLK+ DIFF +3.3V/+5V Note: LVDS2 LCD_PWR can be set to +3.3V or +5V by JP6. The max.
SubCompact Board GENE-QM87 2.33 USB 2.0 Port 5 (CN16) Pin Pin Name Signal Type Signal Level 1 +5VSB PWR +5V 2 USB4_D- DIFF 3 USB4_D+ DIFF 4 GND GND 5 GND GND 2.34 USB 2.
SubCompact Board GENE-QM87 2.35 USB 2.0 Port 8 (CN18) Pin Pin Name Signal Type Signal Level 1 +5VSB PWR +5V 2 USB7_D- DIFF 3 USB7_D+ DIFF 4 GND GND 5 GND GND 2.36 USB 2.
SubCompact Board GENE-QM87 2.
SubCompact Board GENE-QM87 4 Wires 1 GND TOP BOTTOM LEFT RIGHT NC NC NC NC 9 4 Wires Pin Pin Name Signal Type 1 GND GND 2 TOP IN 3 BOTTOM IN 4 LEFT IN 5 RIGHT IN 6 NC 7 NC 8 NC 9 NC Signal Level Chapter 2 Quick Installation Guide 2-29
SubCompact Board GENE-QM87 5 Wires GND UL(Y) UR(H) LL(L) LR(X) SENSE(S) NC NC NC 1 9 5 Wires Pin Pin Name Signal Type 1 GND GND 2 UL(Y) IN 3 UR(H) IN 4 LL(L) IN 5 LR(X) IN 6 SENSE(S) IN 7 NC 8 NC 9 NC Note: Touch mode can be set by JP2.
SubCompact Board GENE-QM87 2.38 COM Port 4 (CN21) DCD DSR RX RTS TX CTS DTR RI GND Pin Pin Name Signal Type Signal Level 1 DCD IN 2 DSR IN 3 RX IN 4 RTS OUT ±9V 5 TX OUT ±9V 6 CTS IN 7 DTR OUT 8 RI IN 9 GND GND ±9V 2.
SubCompact Board GENE-QM87 Pin Pin Name Signal Type Signal Level 1 DCD IN 2 DSR IN 3 RX IN 4 RTS OUT ±9V 5 TX OUT ±9V 6 CTS IN 7 DTR OUT 8 RI IN 9 GND GND ±9V 2.40 LPC Expansion Connector (CN23) LAD0 LAD1 LAD2 LAD3 +3.3V LFRAME# LRESET# GND LCLK LDRQ0 LDRQ1 SERIRQ 1 12 Pin Pin Name Signal Type Signal Level 1 LAD0 I/O +3.3V 2 LAD1 I/O +3.3V 3 LAD2 I/O +3.3V 4 LAD3 I/O +3.
SubCompact Board GENE-QM87 5 +3.3V PWR 6 LFRAME# IN 7 LRESET# OUT 8 GND GND 9 LCLK OUT 10 LDRQ0 IN 11 LDRQ1 (EXT_SMI#) IN 12 SERIRQ I/O +3.3V +3.3V +3.3V 2.
SubCompact Board GENE-QM87 3 RX IN 4 RTS OUT ±6V 5 TX OUT ±6V 6 CTS IN 7 DTR OUT 8 RI/+5V/+12V IN/ PWR 9 GND GND Pin Pin Name Signal Type Signal Level 1 RS422_TX- OUT ±5V 2 NC 3 RS422_TX+ 4 NC 5 RS422_RX+ 6 NC 7 RS422_RX- IN 8 NC/+5V/+12V PWR 9 GND GND ±6V +5V/+12V RS-422 Chapter 2 Quick Installation Guide 2-34 IN OUT ±5V +5V/+12V
SubCompact Board GENE-QM87 RS-485 Pin Pin Name Signal Type Signal Level 1 RS485_D- I/O ±5V 2 NC 3 RS485_D+ I/O ±5V 4 NC 5 NC 6 NC 7 NC 8 NC/+5V/+12V PWR +5V/+12V 9 GND GND Note: COM2 RS-232/422/485 can be set by BIOS setting. Default is RS-232. Pin 8 function can be set by JP11. 2.
SubCompact Board GENE-QM87 4 +5VSB PWR +5V 5 MS_DATA I/O +5V 6 MS_CLK I/O +5V 2.43 Stereo Audio RIGHT Channel (CN26) Pin Pin Name Signal Type 1 R+ OUT 2 R- OUT Signal Level 2.
SubCompact Board GENE-QM87 2.45 Front Panel (CN28) 1 3 5 7 9 2 4 6 8 10 Pin Pin Name Pin Pin Name Pin 1 PWR_BTN- Pin 2 PWR_BTN+ Pin 3 HDD_LED- Pin 4 HDD_LED+ Pin 5 SPEAKER- Pin 6 SPEAKER+ Pin 7 PWR_LED- Pin 8 PWR_LED+ Pin 9 H/W RESET- Pin 10 H/W RESET+ 2.
SubCompact Board GENE-QM87 5 MDI2- DIFF 6 MDI1- DIFF 7 MDI3+ DIFF 8 MDI3- DIFF Note: The Intel/Clarkvillie (PHY) provides a standard IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications. 2.
SubCompact Board GENE-QM87 2.48 USB 2.0/3.
SubCompact Board GENE-QM87 16 GND GND 17 USB2_SSTX− DIFF 18 USB2_SSTX+ DIFF 2.
SubCompact Board GENE-QM87 2.50 COM Port 1 (D-SUB 9) (CN33) 1 6 5 9 Pin Pin Name Signal Type Signal Level 1 DCD IN 2 RX IN 3 TX OUT ±9V 4 DTR OUT ±9V 5 GND GND 6 DSR IN 7 RTS OUT 8 CTS IN 9 RI IN Pin Pin Name Signal Type 1 TMDS_Data2+ DIFF 2 GND GND ±9V 2.
SubCompact Board GENE-QM87 3 TMDS_ Data2- DIFF 4 TMDS_ Data1+ DIFF 5 GND GND 6 TMDS_ Data1- DIFF 7 TMDS_ Data0+ DIFF 8 GND GND 9 TMDS_ Data0- DIFF 10 TMDS_Clock+ DIFF 11 GND GND 12 TMDS_Clock- DIFF 13 CEC 14 NC 15 SCL I/O +3.3V 16 SDA I/O +3.
SubCompact Board GENE-QM87 2.
SubCompact Board GENE-QM87 12 DDC_DATA I/O +5V 13 HSYNC OUT 14 VSYNC OUT 15 DDC_CLK I/O +5V Pin Pin Name Signal Type Signal Level 1 TMDS_DAT2+ DIFF 2 TMDS_DAT2- DIFF 3 GND GND 4 VGA_DDC_CLK I/O 5 VGA_DDC _DATA I/O 6 DVI_DDC_CLK I/O +5V 7 DVI_DDC_DATA I/O +5V 8 VSYNC OUT 9 TMDS_DAT1- DIFF 10 TMDS_DAT1+ DIFF 11 GND GND 12 TMDS_DAT3- DIFF 13 TMDS_DAT3+ DIFF 14 +5V PWR DVI Chapter 2 Quick Installation Guide 2-44 +5V
SubCompact Board GENE-QM87 15 GND GND 16 HPLG_DETECT IN 17 TMDS_DAT0- DIFF 18 TMDS_DAT0+ DIFF 19 GND GND 20 NC 21 NC 22 GND GND 23 TMDS_CLK+ DIFF Pin Pin Name Signal Type C1 RED OUT C2 GREEN OUT C3 BLUE OUT C4 HSYNC OUT C5 GND_ANALOG GND VGA Signal Level 2.
SubCompact Board GENE-QM87 Pin Pin Name Signal Type 1 UIM_PWR PWR 2 UIM_RST IN 3 UIM_CLK IN 4 GND GND 5 UIM_VPP PWR 6 UIM_DATA I/O Signal Level 2.54 Mini-Card (PCIE1) Pin Pin Name Signal Type 1 PCIE_WAKE# IN 2 +3.3VSB PWR 3 NC 4 GND 5 NC 6 +1.5V PWR 7 PCIE_CLK_REQ# IN 8 UIM_PWR PWR 9 GND GND 10 UIM_DATA I/O 11 PCIE_REF_CLK- DIFF Chapter 2 Quick Installation Guide 2-46 Signal Level +3.3V GND +1.
SubCompact Board GENE-QM87 12 UIM_CLK IN 13 PCIE_REF_CLK+ DIFF 14 UIM_RST IN 15 GND GND 16 UIM_VPP PWR 17 NC 18 GND 19 NC 20 W_DISABLE# OUT 21 GND GND 22 PCIE_RST# OUT 23 PCIE_RX- DIFF 24 +3.3VSB PWR 25 PCIE_RX+ DIFF 26 GND GND 27 GND GND 28 +1.5V PWR 29 GND GND 30 SMB_CLK I/O 31 PCIE_TX- DIFF GND +3.3V +3.3V +3.3V +1.5V +3.
SubCompact Board GENE-QM87 32 SMB_DATA I/O 33 PCIE_TX+ DIFF 34 GND GND 35 GND GND 36 USB_D- DIFF 37 GND GND 38 USB_D+ DIFF 39 +3.3VSB PWR 40 GND GND 41 +3.3VSB PWR 42 NC 43 GND 44 NC 45 NC 46 NC 47 NC 48 +1.5V 49 NC 50 GND 51 NC Chapter 2 Quick Installation Guide 2-48 +3.3V +3.3V +3.3V GND PWR GND +1.
SubCompact Board 52 +3.3VSB GENE-QM87 PWR +3.3V Signal Level 2.
SubCompact Board GENE-QM87 PC11 NC PC12 NC PC13 +3.3V PWR +3.3V PC14 +3.3V PWR +3.3V PC15 GND GND PC16 GND GND PC17 NC 2.
SubCompact Board GENE-QM87 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求。 备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。 Chapter 2 Quick Installation Guide 2-51
SubCompact Board GENE-QM87 Chapter 3 AMI BIOS Setup Chapter 3 AMI BIOS Setup 3-1
SubCompact Board 3.1 GENE-QM87 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors. System configuration verification These routines check the current system configuration against the values stored in the CMOS memory.
SubCompact Board 3.2 GENE-QM87 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press or immediately. This will allow you to enter Setup. Main Set the date, use tab to switch between date elements.
SubCompact Board GENE-QM87 Setup Menu Setup submenu: Main Options summary: (default setting) System Date Day MM:DD:YYYY Change the month, year and century. The ‘Day’ is changed automatically. System Time HH : MM : SS Change the clock of the system.
SubCompact Board GENE-QM87 Setup submenu: Advanced Options summary: (default setting) ACPI Settings System ACPI Parameters S5 RTC Wake Settings Enable system to wake from S5 using RTC alarm.
SubCompact Board Dynamic Digital IO Configuration DIO setting SATA Configuration SATA Device Options Settings AMT Configuration AMT Configuration Parameters USB Configuration USB Configuration Parameters Super IO Configuration Super IO Configuration Parameters H/W Monitor Monitor hardware status Chapter 3 AMI BIOS Setup 3-6 GENE-QM87
SubCompact Board GENE-QM87 ACPI Settings Options summary: (default setting) Suspend Disabled ACPI Sleep State S3 only(Suspend to RAM) Select the ACPI state used for System Suspend Wake on Ring Disabled Enabled Enable/Disable Wake on Ring function Chapter 3 AMI BIOS Setup 3-7
SubCompact Board GENE-QM87 RTC Wake Settings Options summary: (default setting) Wake system with Disabled Fixed Time Enabled Enable or disable System wake on alarm event. Wake up time is setting by following settings.
SubCompact Board Wake up second 0-59 Wake system with Disabled Dynamic Time Enabled GENE-QM87 Enable or disable System wake on alarm event. Wake up time is current time + Increase minutes.
SubCompact Board Trusted Computing Options summary: (default setting) Security Device Disabled Support Enabled En/Disable TPM support. TPM State Disabled Enabled En/Disable TPM functionality.
SubCompact Board GENE-QM87 Disable Take Ownership TPM Clear Select one-time TPM operation. Item value returns to ‘None’ after next POST.
SubCompact Board GENE-QM87 Active Processor ALL Cores 1 to Max CPU cores Number of CPU cores to be active.
SubCompact Board GENE-QM87 Dynamic Digital IO Configration Options summary: (default setting) Digital Port X(GPXX) Input Direction Output Set GPIOx as Input or Output Digital Port X(GPXX) Hi Levels Low Set GPIO output level when used as output pin Chapter 3 AMI BIOS Setup 3-13
SubCompact Board GENE-QM87 SATA Configuration Options summary: (default setting) SATA Controller(s) Disabled Enabled En/Disable SATA controller SATA Mode IDE Selection AHCI RAID Configure SATA controller operating as IDE/AHCI/RAID mode.
SubCompact Board GENE-QM87 En/Disable the selected port. Hot Plug Disabled Enabled En/Disable Hot Plug feature for specified port.
SubCompact Board GENE-QM87 AMT Configuration Options summary: (default setting) Intel AMT Enabled Disabled En/Disable Intel® Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution.
SubCompact Board GENE-QM87 USB Configuration Options summary: (default setting) Legacy USB Support Enabled Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI application USB3.
SubCompact Board GENE-QM87 Disabled Enables BIOS Support for USB3.0 (XHCI). When disabled, PCH USB3.0 controller will also be disabled. Device Name Auto (Emulation Type) Floppy Forced FDD Hard Disk CD-ROM If Auto. USB devices less than 530MB will be emulated as Floppy and remaining as Floppy and remaining as hard drive. Forced FDD option can be used to force a HDD formatted drive to boot as FDD(Ex.
SubCompact Board GENE-QM87 Super IO Configutation Options summary: (default setting) Serial Port 1/2/3/4 Configuration Set Parameters of Serial Port 1/2/3/4 Chapter 3 AMI BIOS Setup 3-19
SubCompact Board GENE-QM87 Serial Port X Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port.
SubCompact Board GENE-QM87 IO=3E8h; IRQ=3,4,5,7,10,11,12; IO=2E8h; IRQ=3,4,5,7,10,11,12; Select a resource setting for Super IO device. Device Type RS232 RS422 RS485 Configure COM2/6 operated as RS232, RS422 or RS485.
SubCompact Board H/W Monitor Options summary: (default setting) Smart Fan Function Disabled Enabled Enable or Disable Smart Fan Smart Fan Mode configuration Smart Fan Mode select Chapter 3 AMI BIOS Setup 3-22 GENE-QM87
SubCompact Board GENE-QM87 Smart Fan Mode configuration Options summary: (default setting) CPU Smart Fan Manual Duty Mode Control Auto Duty-Cycle Mode Manual Duty Mode: Manually controlling the fan with a given control PWM. Auto Duty-Cycle Mode: Automatically controlling the fan with given parameters.
SubCompact Board Temperature 1/2/3/4 GENE-QM87 1 to 100, default is 60/50/40/30 Auto fan speed control. Fan speed will follow different temperature by different duty cycle 1-100 Duty Cycle 0/1/2/3/4 1 to 100, default is 100/85/70/60/50 Auto fan speed control.
SubCompact Board GENE-QM87 Options summary: (default setting) PCH-IO Configuration South Bridge Parameters System Agent (SA) Configuration SA Parameters PCH-IO Configuration Options summary: (default setting) Chapter 3 AMI BIOS Setup 3-25
SubCompact Board Power Mode GENE-QM87 ATX Type AT Type Enable or disable ‘It is now safe to turn off your computer.’ string PCI Express Configuration PCI Express Configuration settings PCH LAN Controller Enabled Disabled En/Disabled onboard NIC Wake on LAN Enabled Disabled En/Disabled integrated LAN to wake the system. (The Wake on LAN cannot be disabled if ME is on at Sx state.
SubCompact Board GENE-QM87 System Agent (SA) Configuration Options summary: (default setting) VT-d Disabled Enabled Check to enable VT-d function on MCH CPU SA Audio Enabled Device (B0:D3:F0) Disabled En/Disable CPU SA Audio Device Graphics Configuration Config Graphics Settings Chapter 3 AMI BIOS Setup 3-27
SubCompact Board Graphics Configuration Options summary: (default setting) Primary Display Auto IGFX PEG PCIE SG Select graphic adapters to boot Internal Graphics Auto Disabled Enabled Chapter 3 AMI BIOS Setup 3-28 GENE-QM87
SubCompact Board GENE-QM87 En/Disabled internal graphics device DVMT 32MB Pre-Allocated 64MB~1024MB Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal Graphics Device. DVMT Total Gfx 128MB Mem 256MB Max Select DVMT 5.0 Total Graphic Memory size used by the Internal Graphics Device.
SubCompact Board LCD Control Options summary: (default setting) Primary IGFX Boot VBIOS Defat Display CRT LVDS2 LVDS1 DVI HDM Select Primary IGFX boot display device LVDS1 Control Chapter 3 AMI BIOS Setup Disabled 3-30 GENE-QM87
SubCompact Board GENE-QM87 Enabled Enable or Disable Onboard PTN3460(EDP) LVDS2 Control Disabled Enabled Enable or Disable Onboard PTN3460(DP) LVDS1 Panel Type 640x480,18-Bit,60Hz 800x480,18-Bit,60Hz 800x600,18-Bit,60Hz 1024x600,18-Bit,60Hz 1024x768,18-Bit,60Hz 1024x768,24-Bit,60Hz 1280x768,24-Bit,60Hz 1280x1024,48-Bit,60Hz 1366x768,24-Bit,60Hz 1440x900,24Bit,60Hz 1600x1200,48-Bit,60Hz 1920x1080,48-Bit,60Hz 640x480,24-Bit,60Hz 800x600,24-Bit,60Hz 1280x768,18-Bit,60Hz Select LVDS1 native resolution.
SubCompact Board GENE-QM87 1366x768,18-Bit,60Hz 1280x1024,48-Bit,60Hz 1920x1080,48-Bit,60Hz 1920x1200,48-Bit,60Hz 800x600,24-Bit,60Hz 1024x768,24-Bit,60Hz 1280x768,24-Bit,60Hz 1388x768,24-Bit,60Hz Select LVDS2 native resolution. LVDS1/LVDS2 Inverted Backlight Type Normal Select Backlight control type. Inverted: Brightest for low PWM duty cycle and low voltage. Normal: Brightest for high PWM duty cycle and high voltage.
SubCompact Board GENE-QM87 0% Select Backlight Level Setup submenu: Boot Options summary: (default setting) Quiet Boot Disabled Enabled En/Disable showing boot logo.
SubCompact Board GENE-QM87 Boot Option #X/ XXXX Drive BBS Priorities The order of boot priorities.
SubCompact Board GENE-QM87 Setup submenu: Security Options summary: (default setting) Administrator Not set Password/ User Password Chapter 3 AMI BIOS Setup 3-35
SubCompact Board GENE-QM87 You can install a Supervisor password, and if you install a supervisor password, you can then install a user password. A user password does not provide access to many of the features in the Setup utility. Install the Password: Press Enter on this item, a dialog box appears which lets you enter a password. You can enter no more than six letters or numbers. Press Enter after you have typed in the password. A second dialog box asks you to retype the password for confirmation.
SubCompact Board GENE-QM87 Setup submenu: Exit Options summary: (default setting) Save Changes and Exit Exit system setup after saving the changes Discard Changes and Exit Exit system setup without saving any changes Save Changes and Reset Reset the system after saving the changes Chapter 3 AMI BIOS Setup 3-37
SubCompact Board GENE-QM87 Discard Changes and Reset Save Changes Save Changes done so far to any of the setup options. Discard Changes Discard Changes done so far to any of the setup options Reset system setup without saving any changes Restore Defaults Restore/Load Default values for all the setup options.
SubCompact Board GENE-QM87 Chapter 4 Driver Installation .
SubCompact Board GENE-QM87 The GENE-QM87 comes with an AutoRun DVD-ROM that contains all drivers and utilities that can help you to install the driver automatically. Insert the driver DVD, the driver DVD-title will auto start and show the installation guide. If not, please follow the sequence below to install the drivers.
SubCompact Board 4.1 GENE-QM87 Installation: Insert the GENE-QM87 DVD-ROM into the DVD-ROM drive. And install the drivers from Step 1 to Step 10 in order. Step 1 – Install Chipset Driver 1. Click on the STEP 1-CHIPSET folder and select the OS folder your system is 2. Double click on the infinst_autol.exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 2 – Install VGA Driver 1.
SubCompact Board GENE-QM87 Note 2: If the OS is Windows® XP, you have to install the driver of dotNet Framework first. Simply click on dotnetfx35.exe located in dotNet Framwork folder. Step 3 –Install LAN Driver 1. Click on the STEP3-LAN folder and select the OS folder your system is 2. Double click on the Autorun.exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 4 –Install AUDIO Driver 1.
SubCompact Board GENE-QM87 Step 6 – Install TPM Driver 1. Click on the STEP6-TPM folder and select the OS folder your system is 2. Double click on the Setup.exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 7 –Install TOUCH Driver 1. Click on the STEP7-TOUCH folder and select the OS folder your system is 2. Double click on the Setup.exe file located in each OS folder 3.
SubCompact Board GENE-QM87 Step 9 – Install IRST Driver 1. Click on the STEP9-IRST folder and select the OS folder your system is 2. Double click on the SetupRST.exe file located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 10 – Install Serial Port Driver (Optional) 1. Click on the STEP10- Serial Port folder and select the OS folder your system is 2. Double click on patch.bat file 3.
SubCompact Board GENE-QM87 Appendix A Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1
SubCompact Board GENE-QM87 A.1 Programming GENE-QM87 utilizes FINTEK 81866 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application. Configuring Sequence Description After the hardware reset or power-on reset, the FINTEK 81866 enters the normal mode with all logical devices disabled except KBC.
SubCompact Board GENE-QM87 There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers; (3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
SubCompact Board GENE-QM87 Watch Dog Timer 1, 2, 3 Control Register (Index=F5h,F6h,FAh Default=00h) Appendix A Programming the Watchdog Timer A-4
SubCompact Board GENE-QM87 A.
SubCompact Board GENE-QM87 Void aaeonWdtSetTimeoutCount(BYTE tTimeout){ f81866SetLdn(0x07); f81866WriteByte(F81866_WDT_TIME_REG, tTimeout); } Void aaeonWdtSetEnable(BOOL bEnable){ f81866SetLdn(0x07); if(bEnable){ f81866WriteByte(0x30, 0x01); WDT_BASE_ADDR = (f81866ReadByte(F81866_WDT_BASEADDR_REG_MSB) << 8) | f81866ReadByte(F81866_WDT_BASEADDR_REG_LSB); WDT_STATUS = f81866ReadByte(F81866_WDT_CONTROL_REG); f81866WriteByte(F81866_WDT_CONTROL_REG, WDT_STATUS | 0x20); WDT_STATUS = f81866ReadByte(F81866_WDT_P
SubCompact Board GENE-QM87 Void aaeonSuperIOClose(){ aaeonioWritePortByte(F81866_INDEX, 0xaa); } Appendix A Programming the Watchdog Timer A-7
SubCompact Board GENE-QM87 Appendix B I/O Information Appendix B I/O Information B-1
SubCompact Board B.
SubCompact Board GENE-QM87 Appendix B I/O Information B-3
SubCompact Board B.
SubCompact Board GENE-QM87 B.
SubCompact Board Appendix B I/O Information B-6 GENE-QM87
SubCompact Board GENE-QM87 Appendix B I/O Information B-7
SubCompact Board B.
SubCompact Board GENE-QM87 Appendix C Mating Connector Appendix C Mating Connector C - 1
SubCompact Board GENE-QM87 C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables.
SubCompact Board GENE-QM87 USB Wafer CN12 USB 2.0 Port #3 Molex 51021-0500 1700050207 Cable USB Wafer CN13 USB 2.0 Port #4 Molex 51021-0500 1700050207 Cable 1st LVDS CN14 HIROSE (Single channel DF13-30DS- N/A N/A 1.25C 18/24bit) 2nd LVDS (Dual CN15 HIROSE DF13-30DS- N/A channel 18/24bit) 1.25C USB 2.0 Port #5 Molex 51021-0500 N/A USB Wafer CN16 1700050207 Cable USB Wafer CN17 USB 2.0 Port #6 Molex 51021-0500 1700050207 Cable USB Wafer CN18 USB 2.
SubCompact Board GENE-QM87 UART Wafer CN24 COM Port #2 Molex 51021-0900 1701090150 Cable PS/2 Keyboard & CN25 KB/MS Cable 1700060152 N/A N/A N/A N/A N/A N/A N/A N/A Audio Cable 1709100254 JST PHDR-06VS Molex 51021-0200 Molex 51021-0200 Molex 90075-0141 Molex 90075-0141 Molex 51021-1000 Molex 51021-0200 Battery Cable 175011901C Mouse Stereo-R CN26 Channel Stereo-L CN27 Channel 1st RJ-45 CN29 Ethernet 2nd RJ-45 CN30 Ethernet Audio Line In/Out CN32 and MIC Connector External
SubCompact Board GENE-QM87 Appendix D Electrical Specifications for I/O Ports Appendix E Electrical Specifications for I/O Ports D-1
SubCompact Board GENE-QM87 D.1 Electrical Specifications for I/O Ports I/O Reference Signal Name CN10 VDD Rate Output LVDS Port 1 Inverter / +5V/2A or Backlight +12V/2A Connector LVDS Port 2 Inverter / +5V/2A or CN2 VDD Backlight +12V/2A Connector USB 3.0 Port 1 & +5VSB/1A (per CN31 +5VSB 2 channel) USB 2.0 Port 3 CN12 +5VSB USB 2.0 Port 4 CN13 +5VSB USB 2.0 Port 5 CN16 +5VSB +5VSB/0.5A USB 2.0 Port 6 CN17 +5VSB (per channel) USB 2.0 Port 7 CN19 +5VSB USB 2.
SubCompact Board GENE-QM87 +5V/1A or COM Port 2 CN24 +5V/+12V +12V/1A +5V/(Open Digital IO Port CN9 D0~D7 drain) PS/2 Keyboard/Mouse CN25 +5VSB +5VSB/1A CN5 VDD +12V/0.5A CN3 +5V +5V/1A Combo Port CPU FAN +5V Output for SATA HDD VGA / DVI Ports +5V/1A (depend on VGA: +5V CN35 hardware (reserved) DVI : +5V +5V/0.5A configuration) CFast Slot CFD1 Mini-Card Slot PCIE1 LPC Port CN23 +3.3V +3.3V/0.5A +3.3VSB +3.3V/1.1A +1.5V +1.5V/0.375A +3.3V +3.3V/0.
SubCompact Board GENE-QM87 Appendix E DIO Appendix E Electrical Specifications for I/O Ports E-1
SubCompact Board GENE-QM87 E.
SubCompact Board GENE-QM87 The following is a sample code for 4 in 4 out (2 low 2 high) Outportb(0x2E,0x87); //enter configuration Outportb(0x2E,0x87); Outportb(0x2E,0x07); //set LDN Outportb(0x2F,0x06); Appendix E Electrical Specifications for I/O Ports E-3
SubCompact Board GENE-QM87 Outportb(0x2E,0xA0); //GPIO set 5 register Outportb(0x2F,0xF0); Outportb(0x2E,0xA1); //GPIO output data register Outportb(0x2F,0x30); Outportb(0x2E,0xAA); //exit configuration Appendix E Electrical Specifications for I/O Ports E-4
