Instruction manual

Windows® NT 4.0 Lan Driver

Driver installation

1. Install Windows

NT 4.0 as you normally would for a Lan driver

display. Click the Start buttom, go to Settings and click on

Control Panel icon. Then choose the Network and double click on

the icon. In the Network window, click the Yes, want to install

button. Then a wired to network window will appearclick the Next

button. A select from list window will then appear click on the

choose from disk option. Once you have found your CD-ROM

address click OK.

2. Place the Supporting CD-ROM into your CD-ROM dirve.

cd-rom : \CD ROM\model name\dirver\lan driver\win98

nt\windows.nt\nt40\Oemsetup.inf

"cd-rom" : the drive letter of your CD-ROM drive

"model name" : the model number of your product

and then click OK.

In the next widow INTEL (R) GD82559ER Evaluation Adapter will

appear, click OK.

The next window will be asking for Network Protocal information

select the desired options and click, next.

3. Once the installation is complete, check under the Network win-

dows in the control panel option to verify your LAN driver has

been installed.