Instruction manual

Windows® NT 4.0 Audio Driver
Driver installation
*Must Disable the MPU-401 function first, In your
BIOS*
1. Install Windows
Ò
NT 4.0 as you normally would for a Audio driver
display. Click the Start button, go to Settings and click on Control
Panel icon. Then choose the multimedia and double click on the
icon. In the Multimedia window, click the device button, then click
the add button in the device window. Select the unlisted or updated
driver, then click on the OK button. The next window will ask for a
specific drive location and file name. The audio driver will be found
in the CD-ROM player under the Audio section. After you have
found the location of your audio drive, click OK.
2. Place the Supporting CD-ROM into your CD-ROM dirve. In the
Select Device window, click on Have Disk, select "Browse" and
find the NT 4.0 driver from:
cd-rom : \CD ROM\model name\dirver\audio driver\win98
nt\windows.nt\nt40\Oemsetup.inf
"cd-rom" : the drive letter of your CD-ROM drive
"model name" : the model number of your product
Once you have found the audio driver, click OK. Next an add
unlisted or updated driver window will appear, there will be a
message reading National Xpress Audio (TM) Driver, click OK.
AN I/O window will appear next asking for the address number,
type in 220 and click on the continue button. The very next
window is the Xpress Audio Configuration window. In the bottom
of the page there is a MPU 401 I/O Address, select the disable
function and click OK.
The audio driver has been installed please restart your system.