Instruction manual

Windows® NT 4.0 VGA Driver

Driver installation

1. Install Windows

NT 4.0 as you normally would for a VGA

display. Click the Start buttom, go to Settings and click on

Control Panel icon. Then choose the Display and double click on

the icon. In the Display Properties window, click the Setting

buttom, then click the Display Type buttom into the Display Type

windows, then click on Change buttom from the Adapter Type icon.

And click on Have Disk buttom in the change display window.

2. Place the Supporting CD-ROM into your CD-ROM dirve. In the

Select Device window, click on Have Disk, select "Browse" and

find the NT 4.0 driver from:

cd-rom : \CD ROM\model name\dirver\vga driver\win98

nt\windows.nt\nt40\Oemsetup.inf

"cd-rom" : the drive letter of your CD-ROM drive

"model name" : the model number of your product

and then click OK. The name of the CCryix Xpress

GRAPHICS(TM) driver will appear highlighted in the Modules list

box. Select Gx5530 and Click OK. Click OK to start the driver

installation.

3. Once the installation is complete, the Change Display Type window

will reappear. Click on close to close the window. Then the

Display Properties window will reappear. Click on Apply. Restart

the system for the new settings to take effect.

4. There are five files ( gx.dll, gx.sys, gx.inf, gx.vid, license.pdf) in the

Windows NT 4.0 system.