Instruction manual

Chapter 3 Award BIOS Setup 61
Onboard IR controller
Enable or Disable the onboard IR controller, as default is Disable.
When you set it to Enable. There are several item will be appear as
below.
IR Address select: Set IR address as (2F8H, 3E8H, 2E8H, 3E0H,
2E0H, 3F8H)
IR Mode: Setup IR mode as (IrDA, ASKIR, FIR, CIR)
When you set it to FIR mode. You also have to setting
the FIR DMA.
IR Transmittion delay: enable or Disable IR transmittion delay.
IR IRQ select: Setup IR IRQ
Onboard parallel port
You can enable or Disable the parallel port address / IRQ as 278/
IRQ5, 378/IRQ7, 3BC/IRQ7, for user option.
ECP mode use DMA
Setup ECP DMA, it is available, when parallel port mode be
selected as ECP.
EPP mode select: EPP1.9
Setup EPP operation version when parallel port mode select EPP or
EPP+ECP.