Instruction manual

32 Gene-4310 User Manual
J14 is a 44-pin, dual-in-line header used for flat panel displays.
When the mainboard's power is applied, the control signal is low
until just after the relevant flat panel signals are present.
Configuration of the VGA interface is done completely via the
software utility. You do not have to set any jumpers.
LCD connector (J14)
Pin Signal Pin Signal
1 +12 V
DC
2 +12 V
DC
3 GND 4 GND
5 +5 V
DC
6 +5 V
DC
7 ENAVEE 8 GND
9P0 10 P1
11 P2 12 P3
13 P4 14 P5
15 P6 16 P7
17 P8 18 P9
19 P10 20 P11
21 P12 22 P13
23 P14 24 P15
25 P16 26 P17
27 P18 28 P19
29 P20 30 P21
31 P22 32 P23
33 GND 34 GND
35 SHF CLK 36 FLM (V SYS)
37 M 38 LP (H SYS)
39 GND 40 ENABKL
41 NC 42 NC
43 NC 44 NC
LCD connector (J14)