Instruction manual

Chapter 2 Installation 19
Clear CMOS (JP2) 1~3
You can use JP2 pin 1~3 to clear the CMOS data if necessary. To
reset the CMOS data, set JP2 to 2-3 closed for just a few seconds,
and then move the jumper back to 1-2 closed.
Clear CMOS (JP2) 1~3
Protect* Clear CMOS
JP2
*default
1
2
3
1
2
3
Onboard buzzer / external speaker select
(JP2) 4~7
Onboard buzzer / external speaker select JP2 (4~7)
Internal buzzer* External speaker
* default
JP2
4 5 6 7
4 5 6 7