Instruction manual

Chapter 2 Installation 17
Installing SDRAM (SODIMM)
System Memory
The reverse side of the Gene-4310 contains a socket for 144-pin
dual inline memory module (SODIMM). The socket can be filled in
the SODIMM of any size, giving your GENE-4310 single board
computer between 16 and 128 MB of memory.
Installing the SODIMM card
Initial allignment of the card with the supporting bracket must be
carried out before proceeding any further. The card and the bracket
must be lined up in the specially grooved area before installation.
The SODIMM card is inserted at a 45 degree angle. Push firmly
until the card has been fully inserted, a couple of millimeters. Then
push the card downwards until there is a clicking noise. The
SODIMM card is now held in place by the supporting brackets.
To remove the SODIMM card simply push outwards on the two
silver bracket supports and the card will pop out automatically.