Instruction manual

32 Gene-4310 User Manual
100Base-T Ethernet connector (CN2)
This 100Base-T Ethernet connector is a standard RJ-45 connector.
The onboard Intel 82559ER fast Ethernet controller supports 10Mb/
s and 100 Mb/s N-way auto-negotiation operation.
100Base-Tx Ethernet connector (CN2)
Pin Signal Pin Signal
1 Tx+ 2 Tx-
3 Rx+ 4 NC
5 NC 6 Rx-
7 NC 8 NC
Power connector (P1)
In single board computer (non-passive backplane) applications,
you will need to connect the power to the Gene-4310 board using
P1. This connector is fully compatible with the standard PC power
supply connector. See the following table for its pin assignments:
Power connector (P1)
Pin Signal
1 +5V
2 GND
3 GND
4 +12 Vcc