Instruction manual

30 Gene-4310 User Manual

Display connectors (J14, J16)

The mainboard's PCI SVGA interface can drive conventional CRT

displays and is capable of driving a wide range of flat panel displays,

including electroluminescent (EL), gas plasma, passive LCD, and

active LCD displays. The board has two connectors to support these

displays, one for standard CRT VGA monitors and one for flat panel

displays.

VGA display connector (J16)

A simple one-to-one adapter can be used to match J16 to a standard

15-pin D-SUB connector commonly used for VGA.

Floppy drive connector (J9)

Pin Signal Pin Signal

1 Red video 9 DENSITY SELECT

(no pin)

2 Green video 10 Sync return (GND)

3 Blue video 11 Monitor ID (not used)

4 Not used 12 Monitor ID

5 GND 13 Horizontal Sync

6 Red returned(GND) 14 Vertical Sync

7 Green returned(GND) 15 Not used

8 Blue returned (GND)