Owner manual

Full-size SBC FSB-G41H
Chapter 2 Quick Installation Guide 2 - 9
2.7 Clear CMOS (CMOS1)
CMOS1 Function
1-2 Clear
2-3 Normal (default)
2.8 CompactFlash Voltage Selection (JP1)
JP1 Function
1-2 +3.3V
2-3 +5V (default)
2.9 Front Panel Connector (FP1)
Pin Signal Pin Signal
1 Power On Button (+) 2 Reset Switch (+)
3 Power On Button (-) 4 Reset Switch (-)
5 IDE LED (+) 6 Power LED (+)
7 IDE LED (-) 8 Power LED (-)
2.10 Front Panel Connector (FP2)
Pin Signal Pin Signal
1 External Speaker (+) 2 Keyboard Lock (+)
3 N.C. 4 GND
5 Internal Buzzer (-) 6 I2C Bus SMB Clock
7 External Speaker (-) 8 I2C Bus SMB Data
Note: Internal Buzzer Enable, Close Pin 5, 7
2.11 Digital I/O (CN1)
This connector offers 4-pair of digital I/O functions and address is 801H.