Manual

EPIC Board EPIC-9457 Rev.A
Chapter 2 Quick Installation Guide 2-16
2.19 Wide Voltage Power Connector (CN5)
Pin Signal Pin Signal
1 PGND 2 PGND
3 DC In 4 DC In
The minimum power consumption for booting is 25Watts without any
connecting device. As this board is design for the lower power
consumption, please do not using over 40Watts with all of extra device.
If user is not using the power connect from the board for extra device,
the above rule is not suitable.
2.20 Audio Connector (CN6)
Pin Signal Pin Signal
1 MIC 2 MIC_VCC
3 Audio Ground 4 CD_GND
5 LINE_IN L 6 CD_L
7 LINE_IN R 8 CD_GND
9 Audio Ground 10 CD_R
11 LINE_OUT L 12 LINE_OUT R
13 Audio Ground 14 Audio Ground
2.21 18-bit LVDS Connector (CN7)
Pin Signal Pin Signal
1 ENBKL 2 N.C
3 PPVCC 4 GND
5 LVDS1_TXCLK- 6 LVDS1_TXCLK+
7 PPVCC 8 GND
9 LVDS1_TX0- 10 LVDS1_TX0+