User`s manual

ECM-5716 Series
ECM-5716 Series User’s Manual 57
4.5.6 Power Management Setup
The Power Management Setup allows you to configure you system to most effectively
save energy while operating in a manner consistent with your own style of computer use.
4.5.6.1 ACPI Function
This item allows you to enable/disable the ACPI function.
The choice: Enable, Disable.
4.5.6.2 ACPI Suspend Type
This item will set which ACPI suspend type will be used.
The choice: S1(POS), S3(STR).S1&S3
4.5.6.3 Power Management
This category allows you to select the type (or degree) of power saving and is directly
related to the following modes:
1. HDD Power Down
There are three selections for Power Management , both of them have fixed mode
settings.
Min. Power Saving Minimum power management,
HDD Power Down = 15 Min,
Max. Power Saving Maximum power management,
HDD Power Down =1 Min,
User Defined Allows you to set each mode individually. When not
disabled, each of the ranges are from 1 min. to 1 hr.
except for HDD Power Down which ranges from 1 min.
to 15 min. and disable.
4.5.6.4 Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Initial display power management signaling.