User`s manual

ECM-5716 Series
ECM-5716 Series User’s Manual 47
4.5.2.1 Main Manu Selection
This table shows the selections that you can make on the Main Menu.
Item Options Description
Date Month DD YYYY Set the system date. Note that the
‘Day’ automatically changes when
you set the date
Time HH : MM : SS Set the system time
IDE Primary Master Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu
of detailed options
IDE Primary Slave Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu
of detailed options
IDE Secondary Master Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu
of detailed options
IDE Secondary Slave Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu
of detailed options
Drive A
Drive B
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy disk drive
installed in your system
Boot Display CRT
LFP (LVDS)
CRT+LFP(LVDS)
EFP(PANEL-LINK)
CRT+EFP
Select the Display Device
Panel Type 640x480 TFT
800x600 TFT
1024x768 TFT
1280x1024 TFT
Select the LCD panel type format
Halt On All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which you
want the BIOS to stop the POST
process and notify you
Base Memory N/A Displays the amount of conventional
memory detected during boot up
Extended Memory N/A Displays the amount of extended
memory detected during boot up
Total Memory N/A Displays the total memory available
in the system
Table 2 : Main Menu Selections