User`s manual

User’s Manual
38 ECM-5716 Series User’s Manual
3.7.39 Signal Description – 10/100/1000Base-Tx Ethernet Connector
MDI (0) +/- Media Dependent Interface (0)
1000BASE-T: In MDI configuration, MDI (0)+/- corresponds to BI_DA+/-, and in MDI-X
configuration, MDI (0) +/- corresponds to BI_DB+/-.
100BASE-TX: In MDI configuration, MDI (0)+/- is used for the transmit pair, and in MDI-X
configuration, MDI (0) +/- is used for the receive pair.
10BASE-T: In MDI configuration, MDI (0)+/- is used for the transmit pair, and in MDI-X
configuration, MDI (0) +/- is used for the receive pair.
MDI (1) +/- Media Dependent Interface (1)
1000BASE-T: In MDI configuration, MDI (1)+/- corresponds to BI_DB+/-, and in MDI-X
configuration, MDI (1) +/- corresponds to BI_DA+/-.
100BASE-TX: In MDI configuration, MDI (1)+/- is used for the receive pair, and in MDI-X
configuration, MDI (1) +/- is used for the transit pair.
10BASE-T: In MDI configuration, MDI (1)+/- is used for the receive pair, and in MDI-X
configuration, MDI (1) +/- is used for the transit pair.
MDI (2) +/- Media Dependent Interface (2)
1000BASE-T: In MDI configuration, MDI (2) +/- corresponds to BI_DC+/-, and MDI-X
configuration, MDI (2) +/- corresponds to BI_DD+/-.
100BASE-TX: Unused.
10BASE-T: Unused.
MDI (3) +/- Media Dependent Interface (3)
1000BASE-T: In MDI configuration, MDI (3) +/- corresponds to BI_DD+/-, and MDI-X
configuration, MDI (3) +/- corresponds to BI_DC+/-.
100BASE-TX: Unused.
10BASE-T: Unused.
3.7.40 Parallel Port Connector (LPT)
Signal PIN Signal
NC 26 13 SLCT
GND 25 12 PE
GND 24 11 BUSY
GND 23 10 ACK#
GND 22 9 PD7
GND 21 8
PD6
GND 20 7
PD5
GND 19 6
PD4
GND 18 5
PD3
SLIN# 17 4
PD2
INIT# 16 3
PD1
ERR# 15 2 PD0
AFD# 14 1 STB#