User`s manual

ECM-5716 Series
ECM-5716 Series User’s Manual 101
Appendix B: System Resources
Memory Map
The following table indicates memory map of ECM-5716 series. The address ranges
specify the runtime code length.
Address Range Description Note
00000000 - 0009FFFF System board
000A0000 - 000BFFFF PCI bus
000A0000 - 000BFFFF Intel(R) 82852/82855 GM/GME Graphics Controller
000A0000 - 000DFFFF PCI bus
000CD400 - 000CFFFF System board
000DF000 - 000DFFFF
Ricoh R/RL/RT/RC/5C475(II), R5C520 or Compatible CardBus
Controller
000E0000 - 000EFFFF System board
000F0000 - 000F7FFF System board
000F8000 - 000FBFFF System board
000FC000 - 000FFFFF System board
00100000 - 1DFEFFFF System board
1DFF0000 - 1DFFFFFF System board
1E000000 - FEBFFFFF PCI bus
D8000000 – DFFFFFFF Intel(R) 82852/82855 GM/GME Graphics Controller
E0000000 - E7FFFFFF Intel(R) 82852/82855 GM/GME Graphics Controller
E8000000 - E801FFFF Intel(R) 8255xER PCI Adapter
E8024000 - E80247FF OHCI Compliant IEEE 1394 Host Controller
E8025000 - E8025FFF Intel(R) 8255xER PCI Adapter
E8026000 - E8026FFF
Ricoh R/RL/RT/RC/5C475(II), R5C520 or Compatible CardBus
Controller
E8027000 - E8027FFF Intel(R) PRO/100 VE Network Connection
E8100000 - E817FFFF Intel(R) 82852/82855 GM/GME Graphics Controller
E8180000 - E81FFFFF Intel(R) 82852/82855 GM/GME Graphics Controller
E8200000 - E82003FF Intel(r) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD
E8201000 - E82011FF VIA AC'97 Audio Codec (WDM)
E8202000 - E82020FF VIA AC'97 Audio Codec (WDM)
FABFE000 - FEBFDFFF
Ricoh R/RL/RT/RC/5C475(II), R5C520 or Compatible CardBus
Controller
FEBFE000 - FEBFEFFF
Ricoh R/RL/RT/RC/5C475(II), R5C520 or Compatible CardBus
Controller
FEBFFC00 - FEBFFFFF Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
FEC00000 - FECFFFFF System board
FEE00000 - FEEFFFFF System board
FFB00000 - FFB7FFFF System board
FFB80000 - FFBFFFFF Intel(r) 82802 Firmware Hub Device
Note: The usage of these I/O addresses depends on the choices made in the Evalue
setup screen. The I/O addresses are fully usable for PCI interface if the
corresponding on-board unit is removed from the board.