Owner manual

Embedded Controller
C ES- C V 1 0 1
Appendix C AHCI Setting C-2
C.1 Setting AHCI
OS installation to SETUP AHCI Mode
Step 1: Copy below files from “Driver CD -> STEP3-SATA
\WinXP_32\F6 Install Floppy for Windows” and to diskette.
Step 2: Connect the USB Floppy drive to the board and insert the
diskette from previous step.
Step 3: Configure SATA Controller to AHCI mode in BIOS SETUP
Menu: Advanced -> IDE Configuration -> SATA Mode -> AHCI
Mode