Manual

Advanced System
Controller
AIS-Q454
2.6 Clear CMOS (JP1)
JP1 Function
1-2 Clear CMOS
2-3 Normal (Default)
2.7 ME_TP1
TP1 Function
Open Enable iAMT setup (Default)
1-2 Disable iAMT setup
2.8 Front Panel Connector (FP1)
Pin Signal Pin Signal
1 Power On Button (+) 2 Reset Switch (+)
3 Power On Button (-) 4 Reset Switch (-)
5 IDE LED (+) 6 Power LED (+)
7 IDE LED (-) 8 Power LED (-)
2.9 Front Panel Connector (FP2)
Pin Signal Pin Signal
1 External Speaker (+) 2 Key Board Lock (+)
3 NC 4 GND
5 Internal Buzzer (-) (Default) 6 I2C Bus SMB Clock
7
External Speaker (-)
(Default)
8 I2C Bus SMB Data
*Internal Buzzer Enable: Close Pin 5,7
2.10 USB Connector (USB1)
Pin Signal Pin Signal
1 +5V 2 GND
3 USBD1- 4 GND
Chapter 2 Hardware Installation 2-9