Touch Panel PC AHP-2122 AHP-2122 ® Onboard Intel Atom D525 1.8 GHz Processor Touch Panel PC With 12.1” TFT LCD AHP-2122 Manual 1st Ed.
Touch Panel PC AHP-2122 Copyright Notice This document is copyrighted, 2011. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Touch Panel PC AHP-2122 Acknowledgments All other products’ name or trademarks are properties of their respective owners. AMI is a trademark of American Megatrends Inc. Intel®, and Atom™ are trademarks of Intel® Corporation. Microsoft Windows is a registered trademark of Microsoft Corp. IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation. ® All other product names or trademarks are properties of their respective owners.
Touch Panel PC AHP-2122 Packing List Before you begin operating your PC, please make sure that the following materials are enclosed: AHP-2122 Touch Panel PC Phoenix Terminal Block Mounting brackets and screws DVD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Touch Panel PC AHP-2122 Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a firm surface during installation.
Touch Panel PC AHP-2122 d. The equipment does not work well, or you cannot get it to work according to the user’s manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. 15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20°C (-4°F) OR ABOVE 60°C (140°F). IT MAY DAMAGE THE EQUIPMENT. FCC This device complies with Part 15 FCC Rules.
Touch Panel PC AHP-2122 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○ 硬盘 × ○ ○ ○ ○ ○ 液晶模块 × ○ ○ ○ ○ ○ 光驱 × ○ ○ ○ ○ ○ 触控模块 × ○ ○ ○ ○ ○ 电源 × ○ ○ ○ ○ ○ 印刷电路板 及其电子组件 外部信号 连接器及线材 外壳 中央处理器 与内存 O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下。 X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/
Touch Panel PC AHP-2122 Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Specification .............................................................. 1-3 1.3 Dimension ................................................................. 1-6 Chapter 2 Hardware Installation 2.1 Panelmount Installation ............................................. 2-2 2.2 COM 1/2 RS-232/422/485 Serial Port Connector ..... 2-4 2.
Touch Panel PC AHP-2122 Chapter 1 General Information Chapter 1 General Information 1- 1
Touch Panel PC AHP-2122 1.1 Introduction The AHP-2122 operator panel is an Intel® Atom™ D525 1.8 GHz processor computer that is designed to serve as a human machine interface (HMI). It is a PC-based system with 12.1" color TFT LCD display, onboard Ethernet controller, multi-COM port interfaces and an audio controller. With a built-in CompactFlash socket, the AHP-2122 is as compact and user friendly as a multi-function computer.
Touch Panel PC AHP-2122 1.2 Specification System CPU Onboard Intel® Atom™ D525 1.8 GHz Processor System Memory DDR3 SODIMM x 1, Max. 4 GB LCD / CRT Controller Integrated in Processor I/O Port USB2.0 x 4 RS-232 x 1 RS-232/422/485 x 1 LAN x 2 VGA x 1 Line-out x 1 Storage Disk Drive CompactFlash™ slot x 1 (Internal); 2.
Touch Panel PC AHP-2122 x 320mm x 400mm) Net Weight 15.4 lb (7 kg) Gross Weight 19.8 lb (9 kg) Environmental Operating Temperature -4oF~140oF (-20oC~60oC) Storage Temperature -4oF~158oF (-20oC~70oC) Operating Humidity 10% to 95%@ 40oC, non-condensing Vibration 1 g rms/ 5-500Hz/ Operation—With Hard Disk Drive Shock 20 G peak acceleration (11 msec.
Touch Panel PC AHP-2122 STT:160o (H),140o (V) Backlight LED Backlight MTBF (Hours) HTT : 50,000 STT : 60,000 Touch Screen Type 5-wire analog resistive Resolution 2048x2048 Light Transmission > 80% Lifetime 35 million activations Chapter 1 General Information 1-5
Touch Panel PC 1.
Touch Panel PC AHP-2122 Chapter 2 Hardware Installation Chapter 2 Quick Installation Guide 2-1
Touch Panel PC AHP-2122 2.1 Panelmount Installation The display panel can be mounted into the wall. You will need the screws along with the mounting brackets, which be packed in the accessory box. Follow the steps below: Before you start to follow the instructions, please place the display panel into the wall. See the following illustration on the left. Step 1: Place the mounting brackets and plug the screw. Step 2: Aim the mounting set at the hole on the monitor.
Touch Panel PC 1 2 AHP-2122 3 4 Complete Illustration Chapter 2 Quick Installation Guide 2 - 3
Touch Panel PC AHP-2122 2.
Touch Panel PC AHP-2122 2.
Touch Panel PC AHP-2122 Step 3: Stick the Thermal Pad onto the Hard Disk Drive and fasten the Hard Disk Drive onto the bracket Step 4: Fasten the screws of the hard disk bracket onto the AHP-2122 Chapter 2 Quick Installation Guide 2 - 6
Touch Panel PC AHP-2122 2.4 Wireless Module Installation Follow the connecting locations of each cable showed on the picture below to install the Wireless Module.
Touch Panel PC AHP-2122 Chapter 3 AMI BIOS Setup Chapter 3 AMI BIOS Setup 3-1
Touch Panel PC 3.1 AHP-2122 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal. The system can usually continue the boot up sequence with non-fatal errors. System configuration verification These routines check the current system configuration against the values stored in the CMOS memory.
Touch Panel PC 3.2 AHP-2122 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. Entering Setup Power on the computer and press or immediately. This will allow you to enter Setup. Main Set the date, use tab to switch between date elements.
Touch Panel PC AHP-2122 Chapter 4 Driver Installation Chapter 4 Driver Installation 4 - 1
Touch Panel PC AHP-2122 The AHP-2122 comes with a DVD-ROM that contains all drivers and utilities that meet your needs. Follow the sequence below to install the drivers: Step 1 – Install Chipset Driver Step 2 – Install VGA Driver Step 3 – Install Audio Driver Step 4 – Install LAN Driver Step 5 – Install Touch Panel Driver Step 6 – Install AHCI Driver Step 7 – Install TPM Driver Step 8 – Install Wireless Driver (Optional) Please read instructions below for further detailed installations.
Touch Panel PC AHP-2122 4.1 Installation: Insert the AHP-2122 DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 8 in order. Step 1 – Install Chipset Driver 1. Click on the STEP1-CHIPSET and select the OS folder your system is 2. Double click on the infinst_autol.exe located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 2 – Install VGA Driver 1.
Touch Panel PC AHP-2122 Step 4 – Install LAN Driver 1. Click on the STEP4-LAN folder and select the OS folder your system is 2. Double click on the .exe located in each OS folder 3. Follow the instructions that the window shows 4. The system will help you install the driver automatically Step 5 – Install Touch Panel Driver 1. Click on the STEP5-TOUCHPANEL folder and select the OS folder your system is 2. Double click on the setup.exe located in each OS folder 3.
Touch Panel PC AHP-2122 Step 8 – Install Wireless Driver (Optional) 1. Click on the STEP8-Wireless (option) folder and select the OS folder your system is. 2. Double click on the .exe located in each OS folder 3. Follow the instructions that the window shows 4.
Touch Panel PC AHP-2122 Appendix A AHCI Setting Appendix A AHCI Setting A-1
Touch Panel PC AHP-2122 A.
Touch Panel PC AHP-2122 Step 3: Setup OS Step 4: Press “F6” Appendix A AHCI Setting A-3
Touch Panel PC AHP-2122 Step 5: Choose “S” Step 6: Choose “Intel(R) ICH8M-E/M SATA AHCI Controller” Appendix A AHCI Setting A-4
Touch Panel PC AHP-2122 Step 7: It will show the model number you select and then press “ENTER” Step 8: Setup is starting Windows Appendix A AHCI Setting A-5
