Instruction manual

48 PCM-3335 User's Manual
Installing PC/104 modules
The PCM-3335's PC/104 connectors give you the flexibility to
attach PC/104 expansion modules. These modules perform the
functions of traditional plug-in expansion cards, but save space
and valuable slots. Modules include:
• PCM-3810 Solid State Disk Module
• PCM-3820 High Density Flash Disk Module
• PCM-3110 PCMCIA Module
• PCM-3111 Secondary PCMCIA Module
• PCM-3610 Isolated RS-232 and RS-422/485 Module
• PCM-3660 Ethernet Module
• PCM-3718 30 KHz A/D Module
• PCM-3724 48-channel DIO Module
• PCM-3910 Breadboard Module
Installing these modules on the PCM-3335 is a quick and simple
operation. The following steps indicate how to mount the PC/104
modules:
Step1 Remove the PCM-3335 from your system paying
particular attention to the safety instructions already
mentioned above.
Step2 Make any jumper or link changes required to the CPU
card now. Once the PC/104 module is mounted, you
may have difficulty in accessing these.
Step3 Normal PC/104 modules have "male" connectors and
mount directly onto the main card. Please refer to the
PC/104 module mounting diagram on the following
page. After this is in place, you have the correct
mounting connector to accept your PC/104 module.