User's Manual

User Manual Albert / MTPT10
USER MANUAL
P A G E |7
1.4 Safety Notes
The device may only be repaired by authorized qualified personnel. Unauthorized
opening of the device and inexpertly carried-out repairs may not only seriously jeopardize the
safety of the user, but also cancel all warranty and liability agreements.
When you handle components fitted with Electrostatic Sensitive Devices (ESDs), you must
observe the following points under all circumstances:
 Unplug the power before inserting or removing components containing ESDs.
 While working with ESDs you must discharge yourself by using an ESD wrist strap or
grounding cable to connect yourself at all times to the earth connector of power socket
or a grounded object.
 Place all components containing ESDs on a static-safe base.
 The equipment and tools you use must be free of static charges.
 Always hold boards with ESDs by their edges. Do not touch the components.
 Never touch pins or conductors on boards fitted with ESDs.
1.5 Important Notes
The payment terminal conforms to the current safety standards for data processing equipment.
AEVI does not assume liability or warranty for possible damage resulting from non-compliance
with these Important Notes or wrong usage of the device.
 If this device is taken from a cold environment into the operating room, moisture
condensation may form. The device must be absolutely dry before being put into
service; an acclimatization period of at least two hours must therefore be observed.
 Ensure that no foreign objects (e.g. office clips) find their way into the device, as this
may lead to electric shocks or short-circuits.
 Never plug in or unplug data communication lines during thunderstorms.
 Protect devices from vibrations, dust, moisture and heat.
 You must always discharge yourself (e. g. by touching a grounded object) before
maintenance or service work.
 Never remove the battery while the terminal is switched ON.