User's Manual

User Manual Albert / MTPT10
USER MANUAL
P A G E |50
 Push the module into place. The flap is situated at the top. When it is installed
correctly, the plastic catch clicks automatically.
The battery can be charged and discharged hundreds of times, but will eventually wear out. When
operating times are noticeably shorter than usual, it is time to use a new one.
The payment terminal will operate on battery pack or power supply. The battery charger in the
terminal will be active whenever the power supply is connected. The battery fits in a slot on the
back of the payment terminal.
11.3 Charging the Battery
Before first time operation, it is recommended to charge the battery for about three hours.
During the working day, the device can be kept on its charging station. An internal mechanism
prevents overcharging of the battery.
To improve the battery lifetime, please avoid using the battery in environments with higher
temperatures. The battery should not be discharged completely. Regular charging prolongs the
battery life. Switching off the device overnight is not required in order to optimize battery life.
From an environmental point of view, however, switching off the device overnight is
recommended.
There are two options to charge the device:
 via power supply or
 via charging station (optional).
The standard option of charging the battery is via power supply.
Charging via a charging station (optional) is just as fast.
The battery symbol with percentages on the status bar shows the charging status.
The Li-Ion battery cannot be charged at ambient temperatures higher than 35 °C (95 °F). The
device can still be used inside the charging station or with the external power supply.
A warning indicates a low battery level (see also p. 58).