User's Manual

User Manual Albert / MTPT10
USER MANUAL
P A G E |29
7.5.1 Correct Procedure
Push and hold the Power button for a second. For the first second, there is no on-screen feedback.
After a second, a confirmation prompt appears on screen:
Caution
If it is necessary to Power Down Albert /MTPT10, we encourage the use of this method in order to
prevent data loss.
7.5.2 Forced Power Down
Push and Hold the Power button for approximately 6 – 10 seconds to force the device to turn off.
The screen goes blank as the device Shuts Down from the ON State to the OFF State.
7.5.3 Automatic
Albert /MTPT10 automatically begins to Power Down once the battery has dropped to 1%. All
current activities are stopped so that the battery does not completely run out.