User Manual

Document No. 2007130000
5
Introduction
How This Manual is Organized
This manual is divided into the following sections:
I. Introduction
II. System Specifications
III. CPU Mainboard
IV. I/O Interconnect Board
V. Docking Board
VI. USB/RS232 Auxiliary Board
VII. BIOS Setup Information
General Description
The CareFusion P/N Series 351300-XX is a full-featured All-In-One (AIO) Computer based on the Intel D510
Dual Core Atom Processor and the Intel 82801HBM I/O controller hub (ICH8M). It is used in conjunction with a
docking station such as the CareFusion P/N Series 351253-XX Docking Assembly. The AIO is made up of two
main circuit boards and an auxiliary circuit board. The two main boards are the CPU Mainboard and the Panel
I/O Board. The AIO structure contains an internal metal cage and a slide-in tray which carries the CPU
Mainboard. The metal cage structure is enclosed in a plastic bezel and rear cover. Mounting of the AIO is via a
VESA 100 mounting pattern which is part of the internal metal cage structure. Attachment of the AIO to the
Docking Assembly is through a single self aligning connector set and piloted by mechanical features on the AIO
mounting plate and the Docking Assembly. This document describes the board set for the AIO and the Docking
Assembly.
Support and Service
Customer Service: AAEON Electronics, Inc.
3 Crown Plaza
Hazlet, NJ 07730
[phone]
[phone] Fax
Technical Support Hotline: [phone] x125
Technical Support Email [e-mail]
Warranty Repair Service: http://us.aaeon.com/rma/rma01.asp?t=1
RMA Contact Email: [e-mail]