User Manual

Document No. 2007130000
30
User Password User Password limits access to the machine at boot and any attempts to
enter BIOS setup. If a password is assigned, User will have Administrator
rights. No default password is assigned.
HDD Password This function only appears if a drive is connected.
User Password Set User password to enable drive security. No default password is
assigned.
Master Password Set Master password to enable drive security. No default password is
assigned.
Save & Exit
Save Changes and Exit When you have completed the system configuration changes, select this
option to leave BIOS setup environment and the new system configuration
parameters can take effect.
Discard Changes and Exit Leave BIOS setup environment without saving any changes.
Save Change and Reset When you have completed the system configuration changes, select this
option to leave BIOS setup environment and reboot the computer so the
new system configuration parameters can take effect.
Discard Changes and Reset Reboot the computer without saving any changes
.
Save Changes Save changes done so far to any of the setup options.
Discard Changes Discard changes done so far to any of the setup options.
Restore Defaults Load default value for all setup options.
Save as User Defaults Save the changes done so far as user default.
Restore User Defaults Restore the user default to all the setup options.
Launch EFI from filesystem device Attempts to launch EFI shell application from one of the available file
system devices.