User Manual

Document No. 2007130000
28
BIOS Setup Menu
Main
System Language This option allows the user to set the system default language: English or
French
System Date
This option allows the user to set the date on the system real-time clock RTC.
Simply navigate to the month, day, or year and type in the correct numeric value.
System Time
This option allows the user to set the time on the RTC. Simply navigate to the hour,
minute, or second and type in the correct numeric value.
Advanced
Launch PXE OpROM Enable or disable boot option for legacy network device.
PCI Subsystem settings
PCI Latency Timer This option sets latency of all PCI devices on the PCI bus. The settings
are in units equal to PCI clocks. The settings are 32, 64, 96, 128, 160, 192,
224, or 248. The Optimal and Fail-Safe default settings are 32.
ACPI Settings
Enable ACPI Auto Config Enable or disable BIOS ACPI auto configuration
ACPI Sleep State Suspend disabled, S1(CPU Stop clock), or S3(Suspend to RAM) is
selected for the highest ACPI sleep state the system will enter, when the
SUSPEND button is pressed.
CPU Configuration
Hyper-Threading Enable or disable Hyper-Threading.
(This option is present only if a processor supporting Hyper-Threading
Technology is installed.)
IDE Configuration
ATA/IDE Configuration Select ATA/IDE configuration
Disabled: Disabled SATA controller.
Compatible: PATA and SATA are combined
Enhanced: Enable both SATA and PATA .
Configure SATA as IDE or AHCI for SATA controller. Subsection for Disabled or Enhanced.
Legacy IDE Channels SATA only, SATA Pri/PATA Sec, or PATA only for legacy IDE channel
configuration. Subsection for Compatible.
Intel IGD SWSCI OpRegion
DVMT Mode Select DVMT or Fixed mode.
DVMT/FIXED Memory 128 MB. 256 MB, or Maximum for DVMT/Fixed mode memory size used
by internal graphic device
IGD – Boot Type LFP or CRT+LFP for the video device which will be activated during POST.
This has no effect if external graphic present.
LCD Panel Type Select LCD panel used by internal graphic device by selecting the
appropriate setup item.
USB Configuration
Legacy USB Support Select ATA/IDE configuration
Enabled: Support USB devices.
Disabled: Support USB devices only for EFI applications
Auto: Disable USB devices support if devices are not
connected.
Port 60h/64h emulation Enable or
disable emulation. Enabling configures the complete USB
keyboard legacy support for non-USB aware Oss at port 60h/64h.