Instruction manual

NOTICE: There is no warranty on kits. It is your responsibility to install the board and lights. Kits cannot be returned. This kit can
consume a lot of current. Be careful if you plan to use a battery source that is capable of delivering a lot of current. Contact a
professional if you need assistance. Hyperdyne Labs assumes no responsibility for the misuse of this kit. Night flying can be
dangerous. User accepts all liability of using this kit in their plane and the responsibility of flying at night.
4
The next LED to connect is the blue oval LED for the underside. The + lead is soldered
to the yellow wire and the – lead is connected to the orange wire on the ribbon cable.
The next LED is the yellow cylindrical fuselage LED. The + lead is soldered to the blue
wire and the – lead is connected to the green wire.