Instruction manual

NOTICE: There is no warranty on kits. It is your responsibility to install the board and lights. Kits cannot be returned. This kit can
consume a lot of current. Be careful if you plan to use a battery source that is capable of delivering a lot of current. Contact a
professional if you need assistance. Hyperdyne Labs assumes no responsibility for the misuse of this kit. Night flying can be
dangerous. User accepts all liability of using this kit in their plane and the responsibility of flying at night.
15
Next install the processor board and plug in the LED ribbon cable to the header on the
board. The ribbon cable should be facing away from the board if it is plugged in
correctly.
The processor board fits nicely up against the firewall inside the Cub. You can use
Velcro or double-sided tape to secure it onto the foam wall.