Instruction manual

NOTICE: There is no warranty on kits. It is your responsibility to install the board and lights. Kits cannot be returned. This kit can
consume a lot of current. Be careful if you plan to use a battery source that is capable of delivering a lot of current. Contact a
professional if you need assistance. Hyperdyne Labs assumes no responsibility for the misuse of this kit. Night flying can be
dangerous. User accepts all liability of using this kit in their plane and the responsibility of flying at night.
12
Do the same on the other side for the yellow LED
For the blue LED that goes on the underside of the fuselage, we found it easy to place it
where the bottom ACT sensor used to reside. We took out these sensors once we
mastered piloting the SC. If you still have your sensors installed, you can punch a hole in
the foam and run the LED to a spot of your liking.