Instruction manual

Exposure control
Electronically governed. Data input only for film speeds 13-
31 DIN /1000 ASA. Indication range ± 2 stops
Fully automatic exposure control
Available with or without automatic exposure control,
suitable for later fitting for fully automatic exposure control
Power
12 Volt, Connector: 4-pin DIN 15931
Plug.in battery
12 Volt,-1,2 Ah
Camera motor
DC quartz precision motor, 1500 rpm at 25 fps, 1440 rpm at
24 fps, quartz accuracy 5x10
-6
Frame speeds
Quartz 24/25 fps
Manual speed control
With variable speed unit (VSU) Variable 5 -75 fps (16 SR-HS
II 10- 150 fps)
Power consumption
Approx. 1 Amp at room temperature
Safety
Overload switch cuts off power when load exceeds approx.
4.5 Amps.
Release
2 step release for diaphragm operation
Temp. range
-20°C to + 50°C (-4°C to + 122°F)
Pilot tone
Pilot tone supply DIN 15575, pilot frequency 50 or 60 Hz
Start marking
Automatic full frame start marking
Time Code
Prepared to accept a time code generator