Instruction manual

Service
For a trouble-free film run, especially with regards to
steadiness of image, the camera side film channel must be
kept absolutely clean. Always check that no emulsion
deposit has built up. Emulsion deposits on the film gate can
alter film focal distance which, when lenses with a very short
focal length are used, can lead to unsharpness.
The film channel is easily accessible and can be cleaned
with a PVC rod. We recommend the use of the ARRI plastic
film track cleaning rod. Under no circumstances attempt to
use metal or other hard tools.
The function of the magazine film guide is also of great
importance. Special care must be taken of the film pressure
block. When the magazine is placed on the camera this
automatically forms a protective film guide. The film is
pressed against the pressure gate with a carefully measured
force. To adjust this force, a special unit is necessary which
also can be used to control the movement of the pressure
block.
Apart from, these steps, the ARRIFLEX 16 SR II is basically
maintenance free. Neither oil nor grease is necessary;
Authorized ARRI repair shops are available for Servicing.