Instruction manual

Fuses
To prevent damage to the electronics and the internal
camera wiring from short circuiting inside the camera there is
an electronic plug-in fuse for the motor control unit.
When the magazine is removed and the battery
disconnected from the camera, the plastic cover (b) is
removed (with a coin) and the electronic plug-in fuse can
easily be removed with a special clamp.
2 reserve fuses are located in the plastic cover . When they
are removed from the plastic cover the ends of the fuses
must be bent at right angles so that they fit easily in place.
Replace the plastic cover and procure new fuses.