Instruction manual

The camera power supply
A 12 V, 1.2 Ah battery is plugged into the back of the camera
and requires no cable. At 20°C its capacity is sufficient to
expose a maximum of 6 x 120 m of film. When using this
battery, a special battery adapter is plugged into the power
connection socket (47) and tightened with a screw; the
battery is pushed into the adapter and tilted onto the hinges
of the magazine. The camera is now ready for operation.
The camera can also be run from a 12 V battery connected
with a power cable (mode) KCU). The 4-pole battery
connecter and its cabling is identical to that used with the
ARRIFLEX 16 BLEQ and the ARRIFLEX 35 BL. The camera
battery is used to run the quartz controlled drive motor, the
exposure meter and automatic diaphragm control as well as
all the electrical accessories.