Instruction manual

The universal handgrip
The universal handgrip with electrical press button release
(59) to start the camera and additional cable release (57) to
operate the automatic diaphragm, is, like the standard
handgrip, fastened to the right- hand side rosette (53) and
electrically connected with the 4-pole plug (51). The
protecting collar prevents damage to the flexible cable when
the camera is carelessly set down. The adjustable universal
handgrip is of special use for cameras with automatic
exposure control and with lenses with automatic diaphragm.
The handgrip rosette should first be positioned in the desired
setting and then fixed to the camera. The plug (51) is placed
in the socket (52) and then held securely in position with the
safety catch. The flexible cable (a) is then pulled back and
the square connector plate is pushed upwards into the shoe
for the lightweight support
until resistance is felt. Finally, the protecting collar (16) is
placed into the handgrip hole until it locks. To remove -
follow steps in reverse order.
The press button (57) for operating the automatic diaphragm
must be pressed before starting the