Instruction manual

The standard hand grip
The standard hand grip with electrical press button release
(59) to start the camera is screwed onto the right hand side
of the camera to the rosette (53) and electrically connected
with the 4-pole plug (51 ). The special screw mount allows
the handgrip to be adjusted upwards and downwards and to
be displaced laterally. The standard hand grip is used mainly
when there is no special need in having the combined one
hand operation of automatic diaphragm and camera start, or
when standard lenses without automatic diaphragm are
used.
On request we can supply a left hand standard hand- grip
which is fixed to the left rosette (22).
To start the camera with the press button release, the
camera housing release (28) must be in the measuring
position {27) otherwise the camera will not start. This is to
prevent unintentional running of the camera with open
diaphragm.