User Manual

Module Specification
NO. AT357HP
TITLE:
Module, ZigBee, 17.9 x 24.9 x 2.75mm, 51 I/O, Edge Castellated, SMD
REVISION DATE: 8 April 2013 ISSUE: O PAGE: 10 of 27
27 32 JCLK I
JTAG clock input from debugger
SWCLK - Serial Wire clock input/output with debugger
28 33 PC2 I/O
Digital I/O
JTDO - JTAG data out to debugger
SWO
-
Serial Wire Output asynchronous trace output to
debugger
29 34 PC3 I/O
Digital I/O
JTDI - JTAG data in from debugger
30 35 PC4 I/O
Digital I/O
JTMS - JTAG mode select from debugger
SWDIO - Serial Wire bidirectional data to/from debugger
31 - NC - No Connection
32 49 GND GND Ground
33 49 GND GND Ground
34 16,23,28,37 VDD Power 2.7 to 3.6V Module power domain
35 49 GND GND Ground
36 38 PC1 I/O
Digital I/O
ADC3 - ADC Input 3
SWO
-
Serial Wire Output asynchronous trace output to
debugger
TRACEDATA0 - Synchronous CPU trace data bit 0
37 40 PC0 I/O
Digital I/O
JRST - JTAG reset input from debugger
IRQD - Default external interrupt source D
TRACEDATA1 - Synchronous CPU trace data bit 1
38 41 PB7 I/O
Digital I/O
ADC2 - ADC Input 2
IRQC - Default external interrupt source C
TIM1C2 - Timer 1 channel 2 output
TIM1C2 - Timer 1 channel 2 input
39 42 PB6 I/O
Digital I/O
ADC1 - ADC Input 1
IRQB - External interrupt source B
TIM1C1 - Timer 1 channel 1 output
TIM1C1 - Timer 1 channel 1 input