Instruction Manual
INSTRUGnON
MANUAL
Industrial Triplex Pumps
INDUSTRIAL
TRIPLEX
PUMPS
GENERAL
SAFETY
INFORMAnON
Please read and save these instructions.
Read
carefully before attempting
to
assemble, install, operate
or
maintain
the product described. Protect yourself
and others
by
observing all safety
information. Failure
to
comply with
instructions could result in personal
injury and/or property damage! Retain
instructions for future reference.
r.::al
Lh
DANGER:
RISK
OF
t:::J!!!!!!!I
INJURY
FROM
SPRAY
Always
wear
safety glasses
or
goggles
and
appropriate clothing.
it]
Lh
WARNING:
RISK
OF
BURSTING
•
The
pump
is
designed
to
pump
non-
flammable
or
non-explosive fluids.
These pumps are intended
to
pump
clean
filtered
water
only.
•
Do
not
operate in
or
around an
explosive
environment.
•
Do
not
after the
pump
from the
manufacturers design.
•
Do
not
operate gasoline engines in a
confined area; always have adequate
ventilation.
•
Do
not
exceed
the
pump
specifications
in speed
or
pressure.
lil]
Lh
WARNING:
RISK
OF
HOT
SURFACES
•
Do
not allow children
to
operate the
pump.
• Never
point
the high-pressure
discharge
at
a person, any part
of
the
body
or
animals.
• Maximum water temperature is
140°F.
.&.WARNING: This
product
and
its
exhaust contain chemicals known
to
the
State
of
California
to
cause cancer, birth
defects
or
other
reproductive harm. In
addition, some cleaning
products
and
dust
contain chemicals known
to
the
State
of
California to cause cancer, birth
defects
or
other
reproductive harm.
Wash
hands
after
handling.
Lh
WARNING: Adequate protective
guards
must
cover
all mowng parts.
Perform routine maintenance on the
pump
and
components.
Lh
WARNING: Use
only
components
that are rated
for
the flow
and
pressure
of
the pump, this
would
include hose,
fittings,
safety
valves,
spray guns etc.
DESCRIPnON
Designed
to
work
at
3400
RPM
when
coupled
to
a gasoline engine. The
314"
(19,
1 mm) hollow shaft and universal
mounting flange provides connection
to
most
314"
(19,1
mm)
shaft, horizontal
engines.
SPECIFICAnONS
Oil Capacity:
8.0
oz.
(237
mQ
Ports
Inlet
Port
(Supplied): Standard
garden hose connection with
inlet
strainer.
Discharge
Port
(Supplied): M22
connection.
Thermal
Relief Valve (Supplied):
When the temperature inside the pump
rises too high, this
valve will open and
release a gush of water in an effort
to
lower the temperature inside the pump.
The
valve will then close.
Detergent Injection System (Supplied):
Mixes cleaners
or
cleaning solvents
with the water
to
improve cleaning
effectiveness .
NOTICE: Allowing the
unit
to
run
for
more
than
two
minutes without the
gun
trigger being pulled
could
cause
overheating
and
damage
to
the pump.
2-
ENG
140*213MM