SDS

SAFETY DATA SHEET
OSHA Standard Format
SECTION 8: EXPOSURE CONTROLS
Isopropyl Alcohol (67-63-0)
ACGIH: 200 ppm TWA
OSHA: 400 ppm TWA; 980 mg/m3 TWA
Engineering Controls: Normal room ventilation is usually adequate under normal
use.
Personal Protective Equipment (PPE):
Eye/Face Protection: None needed under normal use – Wear goggles is exposed
to unusual amount and splashing
Skin Protection: None needed under normal use -- Wear overalls or apron if
splashing is possible
Respiratory Protection: May be needed if vapor concentrations are high.
General Hygiene Considerations: None needed under normal use.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Non-woven cloth saturated with liquid. <0.5mL of free liquid in packaging.
Appearance/Color: Clear
Odor: Alcohol
Flash Point: 53.1°F/ 11.7 °C – Closed Cup Method
PH: Not Available.
Vapor Density: 2.1 (air=1)
Boiling Point: 80°C
Vapor Pressure: No data
Melting Point: No data
Freezing Point: Not Available
Flammability Properties (see section 5)
Solubility (in water): Soluble
Specific Gravity @ 25°C: 0.88-0.92
Evaporation Rate: Not Available
Octanol/Water partition coefficient : Not Available
Auto-ignition temperature: Not Available
Decomposition temperature: Not Available
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable under normal ambient temperatures 70°C (21°C)
Condition to Avoid: Avoid excessive heat or sources of ignition.
Incompatible Materials: This product reacts with strong acid, strong bases, and oxidizing agents.
Hazardous Decomposition: Upon decomposition, this product evolves carbon monoxide, carbon
dioxide, and/or low weight hydrocarbons.