Specifications

COMMUNICATION
ACCESSORIES
New improved modular
component system that
simplifies custom
installations and makes
any modifications or
future expansion easy
and versatile. Please
read on for an
explanation.
UNDERSTANDING
THESYSTEM....
SERIES1-SURFACE&WALLPLATES
Series 1 components are designed to take a Snap-In Module
(KeyStone Jack) directly, without the need for the “SIM” interface
module holder plates. Two varieties of Series 1 types are available.
The Surface Mount types are available in one or two-way
configurations(CSB110&CSB120).
The Flush Mount types are available in 1, 2 and 4 way types
(CWP110, CWP120 & CWP140) which can be fitted onto a
mounting block (CMB10) or a standard giprock bracket for wall
mounting.
Planning for future expansion is possible by using a blanking plate
tocoveranyun-usedoutlets(CSM100).
SERIES2-SURFACEBOXES
To maximise versatility, Series 2 surface mount boxes have
provision for Module Holders. These “SIM” interfaces can take 1 or
2 inserts (KeyStone Jacks), or blanks. There are 3 surface mount
boxes available to take 1, 2 or 3 “SIM” interfaces ( CSB220, 240,
260).
SERIES2-WALLPLATES
Series 2 flush wall plates (CWP200) are even more versatile. They
can be installed on our mounting block (CMB10) or standard
gyprock brackets. There are also angled module holders as well as
standard module holders, both can be mixed and matched, eg. 1
standard and 1 sloped holder or 2 of the same etc. Blank plates are
available to cover up any un-used slots and to allow for easy future
expansion.
“CSM”INSERTMODULES (KeyStoneJacks)
The insert modules are all standard and will fit all boxes and module
holders in the KeyStone system. Codes start CSM, see next page.
Theyareavailablein“F”type,CAT5E,SCfibre&STfibre.
The CAT5E keystones are available in white, red and yellow. There
are 4 labeled dustcovers supplied with each CAT5 KeyStone jack
forid.Tagsforphone,CAT5,voiceandablank.
SAVETIMEANDMONEY
With the use of IDC Punch-Down tools and the very simple
Snap-Lock nature of the KeyStone system, combined with a variety
of modules & colour coding, even the most extensive &
complicated installation is now made efficiently logical, achievable
and upgradeable. The universal nature of the module system also
reducesyouroverallstockholdingtoo.
KEYSTONE
COMMUNICATION
CONNECTIONS
The KeyStone communication
connection system offers the
installer a quicker, easier,
professional and expandable
installation solution. Keystone
easy access modules use the
quicker IDC cable connection
process. The Snap-In system
makes the install process efficient
and any future changes straight
forward.
SERIES1-“CSB1"SURFACEMOUNTBOXES
Simple.Comprehensive.
Professional.Includes
labels,cableties,etc.
Requires“CSM”modules.
1 Way CSB110
2 Way CSB120
SERIES1-“CWP1"WALLPLATES
Standard“Light-Switch”
sizewallplate.
Labels.Screws,etc.
Requires“CSM”modules.
Code Ports
CWP110 1
CWP120 2
CWP140 4
SERIES2-“SIM”KEYSTONEPLATES
“SIM” SNAP-IN-MODULES
Usesthe“CSM”series
jacksystemwiththe
additionalflexibility
ofinterfacemodulesfor
maximuminstallation
versatility&future-
proofexpandability!
SERIES2-“SIM”MODULEHOLDERPLATES
1"(25mm)height
Snap-In-Modules.
See“CSM”ports.
UseCWP200wallor
CSB220,40,60boxes.
Code Ports
SIM210 1
SIM220 2
SERIES2-“SIM”45°MODULEHOLDERPLATE
1½"(37mm)height
Snap-In-Modules.
SameasSIM210,20
butangledforcable
strainrelief,etc.
Code Ports
SIM211 1
SIM221 2
SERIES2-“SIM”BLANKINGPLATES
Fill-In blankspaces
oruseforfuture
systemexpandability.
Code Height
SIM202 ½"12mm
SIM200 1"25mm
SIM204 1½"37mm
16-32 CAT-5KeystoneProducts