Instructions for use

107
Manueldel’utilisateur/Usermanual :SLICE‐900
‐ Assemblezlesdominosdecommandesurlespalonniers
deservos.
‐ Mountthepushrod ends ontheservo horns.
‐ Collezlesupportdel’accu.
‐ Gluethebattery holder.
118
‐ Insérezlesservos 7450NG‐D,ilsrentrentlégèrement
enforce(lecollageestfacultatif).
‐ Insertthe7450NG‐Dservos,they arefitting abittightly
(glueis notmandatory).
‐ VouspouvezégalementutiliserlesdominosA2Pro
(Réf.6201).
‐ Youcan also usetheA2Prorod endadjusters
(Ref.6201).
12
9
12
9
‐ Sivousutilisezdesservos différents,vouspouvezcoller‐Mettezlesservos auneutreetvissezlespalonniers.
5
www.a2pro.fr
lessupportsfournis.
‐ Ifyou areusing different servos,you can gluethe
supplied servo mounts.
‐ Setservos toneutral positionandscrew thecontrol
horns on.