Operating instructions

15
8. Technical specification ETA-100
English
ETA-100
Professional digital terrestrial receiver with
Conax and CI-slot
Input freq 47-860 MHz
LNB connector Type F, female, 75 Ω
Input return loss 7 dB
Input level range -65 to -30 dBm
1)
C/N limit 18 dB
1)
Bandwidth 6/7/8 MHz
DVB compliance DVB-T (2K and 8K)
Co/adj channel PAL Compliant to Nordig 2 PAL
1)
QEF reception with test signal: 8K, 64 QAM, 1/4 guard
interval, 2/3 FEC
Output standards PAL, SECAM or NTSC
Impedance 75 Ω
Output conn. Phono, female (yellow)
Output level 1 Vpp @ 75 Ω
Aspect Ratio Letterbox, Pan/Scan, or
conversion Combined (14:9)
programmable
Teletext Insertion in VBI
Subtitling Teletext or DVB subtitling
Decryption Embedded Conax, Common Interface
Power supply 6-9 VDC (7,5 V nom.)
Power consumption Typ. 6 W
Dimensions 160x105x20 mm
(excluding connectors)
Weight Approx. 330 g
Controller Palm PDA or PC
(software included)
Control connector 9P D-sub, male
Smartcard connector ISO 7816
CAM connector PCMCIA
Indicator lights “on”, “transmission error”,
“access error”
Operating temp 0 to +50°C
Output Stereo or Mono programmable
Output conn. Type Phono, female (R red, L white)
Impedance < 100 Ω
Output level Phono: Typ. 0dBm @ 600 Ω (0.77 Vrms)
variable
COFDM Terrestrial Receiver Miscellaneous
MPEG Decoder- Video
MPEG Decoder- Audio
This specification may be subject to change without notice.