Specifications

8
English
3 Connections and indications (continued)
ECX-200 cont.
Common Interface Insert your Common Interface Conditional
Access module into this slot
Power on indicator Green light indicates that power is on.
Rx error Red light indicates that the receiver is not
locked to the QAM transmission.
Access/Tx error Red light indicates that the smart card is not
authorised or that decryption is not working properly
Ethernet port Ethernet for connection to a PC or handheld
device with web browser
Antenna in Connect your QAM signal to this input.
RF out Connection to Cable TV or SMATV network
A/V out *) Connection for monitoring or to an RF modulator.
ASI in *) Input for ASI (Asynchronous Serial Interface) for high
speed transport stream reception.
ASI out Output for ASI (Asynchronous Serial Interface) for high
speed transport stream transmission.
DC in Connect a DC voltage to this input (6-10V).
*) Optional function i.e. SW Options is needed
NOTE! We recommend to use only A2B original power supply
for correct functionality and life cycle. Warranty will be void in
case of damages caused by power supplies not supplied by A2B.