Specifications

66
3 Connections and indications (continued)
A/V out *) Connection for monitoring or to an RF modulator.
ASI in *) Input for ASI (Asynchronous Serial Interface) for
high speed transport stream reception.
ASI out Output for ASI (Asynchronous Serial Interface)
for high speed transport stream transmission.
DC in Connect a DC voltage to this input (6-10V).
*) Optional function i.e. SW option is needed
NOTE! We recommend to use only A2B original power supply
for correct functionality and life cycle. Warranty will be void in
case of damages caused by power supplies not supplied by A2B.
English
ESX-200 cont.
ETX-200
Ethernet port (RJ 45) for
control, settings
IPTV out and SNMP
Access/Tx error
indicator
COFDM Rx error
indicator
Power on indicator
Front panel view of
ETX-200
Rear panel view of
ETX-200
Common Interface slot
Antenna
in
RF out
ASI out
ASI in
DC in
A/V out
Common Interface Insert your Common Interface Conditional Access module
into this slot
Power on indicator Green light indicates that power is on.
Rx error Red light indicates that the receiver is not locked.
Access/Tx error Red light indicates that the smart card is not authorised or
that decryption is not working properly.
Ethernet port Ethernet for connection to a PC or
handheld device with web browser