Specifications
5252
MPEG Decoder - Audio
Supported formats MPEG 1 layer II, AAC HE.
Selection of Dual mono in,
Output Stereo or Mono
Impedance < 100 Ω
Output level 0 dBu
Level adjustment +3 to -9dB
Supported formats MPEG2 MP@ML, MPEG4 H.264 AVC
Output standards PAL, SECAM or NTSC
Impedance 75 Ω
Output level 1 Vpp @ 75 Ω
Aspect Ratio Letterbox, Pan/Scan,
or conversion Combined (14:9)
programmable, WSS
Teletext Insertion in VBI
Subtitling Teletext or DVB subtitling
Decryption Common Interface (PCMCIA 5VDC)
Multidecryption Yes *)
*) SW option is needed
MPEG Decoder - Video
Graphical User Interface (GUI)
ASI bit rate 55 Mbit/s
Max payload bitrates:
Input bit rate 55 Mbit/s *)
Output bit rate 55 Mbit/s *)
PCR restamping Yes
PSI/SI management Yes
Remultiplexing Yes
*) The input, output and throughput bitrate is highly
dependent on the type of application that is running in
the unit.
ASI input (SW option) – output
Remultiplexing (SW option)
English
This specification may change without prior notice.
Miscellaneous
Power supply 7,5 VDC nom. (6-10 VDC)
Power consumption Typ. 15 W (excl LNB feed)
Dimensions 165x105x37 mm (excl. connectors)
Weight Approx. 390 g
Controller Embedded web server
Operating temperature -20 to +50˚C, non-condensing
IPTV out (SW Option)
Graphical User Interface for easy set up of complex
systems. Simple handling of remultiplexing
and creation of new multiplexes from any input.
Disable PID’s and create PID loop through makes it more easy to
get the PSI/SI content that you want.
Default settings of PSI/SI tables to avoid clashes in the output
multiplexes.
Simple menu structure for setting input, output and processing
parameters.
Each EXM unit contains an embedded web server.
Standard web browsers (Internet Explorer,
Mozilla Firefox etc.) are supported
Max output bit rate 55 Mbit/s
2)
Connector RJ 45 (same as control)
Output protocol UDP, Multicast or Unicast
3 )
PSI/SI management Yes
Remultiplexing Yes
2)
Single SPTS/MPTS and only IPTV as output
3) Depending on choosen IP address
Multicast = 239.0.0.1 to 239.255.255.254
Unicast = Other IP addresses
Broadcast = All IP addresses x.x.x.255
Each ESX-200 contains a remultiplexer for 2 incoming
transport streams. The transports streams can be received
from satellite or IP, and from the ASI input. PID remapping
is made automatically or manually by PID management. LCN
(Logical Channel Number) can be chosen.
The following components can be remultiplexed:
Audio, Video, Subtitling, PAT, PMT, NIT actual, EIT, CAT,
SDT, TDT and TOT
IP connection between EXM units in a system is required for
NIT, EIT other and SDT other.
SNMP
SNMP agents Payload bitrate
Peak bitrate
Uptime
Tuner locked
Tuner signal level
Tuner SNR (C/N)
Tuner BER
SNMP traps Tuner locked/unlocked
Cold reboot
Warm reboot