Specifications

50
10 SNMP
With FW from version 1.22 and later in the EXM unit you are able to use the
SNMP Interface for monitoring the EXM unit. To enter the SNMP menu on the
unit, write: /snmp.html after the IP address in the web browser.
Example: 192.168.0.20/snmp.html
In the [SNMP agent] part of the menu you can start the SNMP agent, select
Listen port, Read community, Write community.
In the [SNMP traps] part of this menu you can select Dest. Address (IP
address to the PC that is listening), Dest. port and Community.
NOTE! To be able to use the SNMP you need to use a 3rd party program. One
program you can download for trial is http://www.ireasoning.com/mibbrowser.shtml .
Download the a2b-mibs.zip file that is found in the SNMP menu, unzip and copy
the two mib files into theMIB map in the 3rd party program.
English
SNMP agent = the “agent” (SW) that
listens for GET or SET
Listen port = port to listen to
Read community = “password” for
Management System to be able to access
SNMP agents for GET commands.
“Public” as default.
Write community = “password” for
Management System to be able to access
SNMP agents for SET commands (not
implemented yet). “Public” as default.
SNMP traps = the “trap” (SW in EXM) that sends information to the
Management System when defined instances occur
Dest. address = IP address to host for Management System
Dest. port = port in MS host
Community = “password” for Management System to be able to access
SNMP traps. “Public” as default.