Specifications

3737
The EXM unit can be installed either as a stand alone unit (Wall mount kit for single
EXM unit) or in a base unit (EBU-100).
Before connecting power to the EXM unit, make sure that all other
connections have been made. A coaxial cable of good quality with an F-connector
should be connected to the Antenna input and another one from the RF output to
the cable TV network. Connect a power supply and make all necessary settings as
described in section 4 and section 5.
Note! Important information in page 4 about connecting the DC cable.
English
Installation in a base unit with 5 EXM modules
and common power supply.
EPP-100 power
Supply 100W,
11 outputs
Art no: 103100.02
EXM wall
mount
Art no: 121000.01
DC-cable for
EXM unit
Art no: 500200.01
Accessories
EBU-100 Base unit
for 5 EXM unit modules
and power supply
EPP-100
Art no: 104100.01
ESP-110 single
power supply 25W,
1 output
Art no: 103200.02
A/V cable EXM
Art no: 500210.01
EXM style cover
plate 50mm
Art no: 700004.10
EXM style cover
plate 20mm
Art no: 700003.10
ASI cable 250mm
Art no: 500250.01
ASI cable 1000mm
Art no: 501000.01
8 Installation and Configuration examples