Specifications

5.5 System options (continued)

User control (Users)

In the System Options menu there is a new menu where you are able to set Users. When

“Enable Usercontrol” is chosen you can set the authority of a user as Read or Read and

Write allowance. You click on “Add user” and then make the choice for a user with Read

and Write authorities as Admin and for only Read allowance for other users that shall be

able to Read from unit(s) but not being able to write i.e. make changes in an unit.

NOTE! Always add first user with both Read and Write rights else you have to use a back

door (see below) to be able to change settings in a unit.

If the details for the User control is forgotten, you can disable the User control (login) by

using Telnet. After connecting to the unit by Telnet you will get be asked for Username

and Password. The Username is: designfortv and the password is 123a2b456 After this

English

5 Menus and settings (continued)