Specifications

3333
English
5.5 System options
(continued)
Maintenance
This menu allow you to
manage configuration of a
EXM unit by [Download] of the
existing configuration in the
unit, [Upload] of a saved
configuration or [Restore] the
unit to factory settings.
NOTE! Always do a reset
before using Restore button
and also wait 2 minutes after
clicking that button before you
select anything in the web ui .
In here you can also do a
[Restart] of the unit. If the unit
has problems that is hard to
find the reason for, you can
download a [Diagnostic] file
from the unit and send that file
to our support department.
[e-mail]
5 Menus and settings (continued)
Network
This menu allow you to manage network settings for an EXM unit.
You are able to change the IP address, the Netmask and the Gateway
for an unit.
NOTE! If more than one unit is installed you must set different IP addresses to all EXM
units if they are connected to a switch.